1-338068-6 TE Connectivity, 1-338068-6 Datasheet - Page 3

• Manufacturer Part Number: 1-338068-6
• Description: SOCKET, RIBBON-BOARD 16WAY
• Manufacturer: TE Connectivity
• Type: FFC Connectorr

Specifications of 1-338068-6

• Contact Gender: F
• Mounting Style: Through Hole
• Number Of Contact Rows: 2
• Number Of Contacts: 16POS
• Pitch (mm): 2.54mm
• Body Orientation: Straight
• Contact Resistance Max: 10mOhm
• Operating Temp Range: -40C to 105C
• Housing Material: Polyester
• Housing Color: Red
• Contact Material: Phosphor Bronze
• Contact Plating: Tin Over Nickel
• Termination Method: Solder
• Product Height (mm): 4mm
• Product Depth (mm): 5.2mm
• Product Length (mm): 24.9mm
• Connector Type: Board-Board
• Rohs Compliant: Yes
• Product Type: Connector
• Type Of Connector: Female-On-Board
• Mount Angle: Vertical
• Pcb Mount Style: Through Hole
• Mating Connector Lock: With
• Polarization: Without
• Number Of Positions: 16
• Locking Latch: With
• Centerline (mm [in]): 1.27 [0.050]
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Tin
• Housing Entry Style: Top
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Packaging Method: Reel
• Packaging Quantity: 2,500
• Lead Free Status / RoHS Status: Compliant

.
3.3.3
Male-on-board connector assembly, consisting of a number of contact pins, press-fit in a moulded
housing.
3.3.4
Male-on-wire connector assembly, consisting of a number of contact with slotted beam section, press-fit in
a moulded housing, The connector features a cable cover, pre-loaded on the housing.
3.3.5
Paddle board connector assembly, consisting of a number of contact with slotted beam section, press-fit
in a moulded housing. The connector features a cable cover, pre-loaded on the housing.
After the application of the cable, the connector assembly is soldered in the PC board thus providing a
reliable and cost-effective permanenet connection of ribbon cable to the PC-board.
3.3.6
Top entry, consisting of a number of contact springs press-fit in moulded housings.
3.3.7
Bottom entry, consisting of a number of contac springs, press-fit in moulded housings. The housing is
partly falling in the PCB, causing a low built-in height.
3.3.8
The cosi connector is a male-on-wire connector designed for discrete wires.
Contacts can be terminated to the wire with a semi-automatic stripper crimper or with a dedicated
handtool, and manually inserted into the housing.
3.4
With the connector versions, mentioned in section 3, the following interconnections can be realised
•
•
•
•
•
•
•
Rev. F
R6-77 (Rev. 07-01)
Wire-to-board connection with the cable parallel to the PC board.
Wire-to-board connection with the cable perpendicular to the PC board .
Board-to-board connection with two parallel boards (sandwich configuration)
Board-to-board connection with the perpendicular PC boards (mother/daughter board
configuration)
Wire-to-board and/or Board-to-board connections with the connector system positioned on the
solder side of the PC board -for instance Surface Mount Application-
Permanent connections of ribbon cable to PC board, using the Paddle board connector version.
Wire-to board connection with discrete wires.
Male-on-board connector
Male-on-wire connector
Paddle board connector
Female-on-board SMD connector.
Female-in board SMD connector.
Male on wire COSI (Crimp On Snap In) connector
Application
108-19052
Page 3 of 15