EVB-EMC1063 SMSC, EVB-EMC1063 Datasheet - Page 5

• Manufacturer Part Number: EVB-EMC1063
• Description: MCU, MPU & DSP Development Tools Evaluation Board
• Manufacturer: SMSC

Specifications of EVB-EMC1063

• Processor To Be Evaluated: EMC1063
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EVB-EMC1043/1053/1063 User Manual
2.1.2
2.1.3
SMSC EMC1043/1053/1063
Board Layout
Installing the EVB
1. Install the Register Manager (RegMan) application and device driver on a PC by running Setup.exe
2. Connect the supplied USB cable to an available USB port on the PC. Plug the “mini-B” end of the
3. Start the EVB Software by selecting the Register Manager application from the SMSC folder from
Note: The Windows Register Manager application allows viewing and changing register values for a
The EMC1043/1053/1063 power up with temperature monitoring disabled. The monitor can be started
by selecting “Started” in the combo box on the upper-left of the Register Manager menu bar.
Alternately, you can start the monitor by clearing bit 6 in the Configuration Register, 0x09.
from the RegMan distribution CD. A revision history and install/uninstall notes may be found in the
readme.txt file on the disk.
USB cable into EVB connector P6. The +3.3V and Bridge ACT LEDs should illuminate. After the
EVB is connected to the PC the “Find New Hardware” wizard will pop up for USB driver installation.
Follow the instructions in the readme.txt file to complete the installation process.
the Programs Windows Start menu. The EVB will initialize and the Register Manager Help screen
will appear as in
running.
variety of EVBs including the EMC1 001, EMC1002, EMC1023, EMC1033 and
EMC1043/1053/1063. The Register Manager software only needs to be installed once to
support all of these EVBs. The list of supported EVBs may be found in the readme.txt file
included on the distribution CD.
Figure 2.1 EMC1043/1053/1063 Board Outline and Silkscreen
Figure
2.2. The USBAct LED should be blinking when the Register Manager is
Bottom Side
JP4 (not on
silkscreen)
5
EMC1043
EMC
1043
Revision 1.1 (12-14-06)