4432-DKDB2 Silicon Laboratories Inc, 4432-DKDB2 Datasheet - Page 37

• Manufacturer Part Number: 4432-DKDB2
• Description: WiFi / 802.11 Modules & Development Tools Single Antenna TRx Testcard Hi band
• Manufacturer: Silicon Laboratories Inc

Specifications of 4432-DKDB2

• Modulation: GFSK
• Operating Voltage: 3.3 V
• Antenna: SMA
• For Use With/related Products: Si4432
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1. Parameters on setup screen 4 are not relevant to PER evaluations. Silicon Labs recommends leaving them at
2. Press <GO> to move on from this screen.
1. Ensure the Packet length matches that programmed in the RF signal generator.
2. Select number of packets to be received by the receiver using the Max. Packets field. The appropriate number
3. Press <GO> to move on from this screen.
1. Press <Start> to commence packet error rate evaluation.
their default values.
of triggers will be sent by the SDB according to this setting.
This will start generating pulses on P1.4 that are used to trigger the RF signal generator. The RF generator will
send one packet for every external trigger. As the radio is set to receive mode it is waiting for a specific pre-
programmed packet to be arrive at the pre-programmed frequency, modulation and data rate.
Figure 51. Setup Screen (3 of 5)
Figure 52. Setup Screen (4 of 5)
Figure 53. Setup Screen (5 of 5)
Rev. 0.4
SDBC-DK3 UG
37