AD8014ART-REEL7 Analog Devices Inc, AD8014ART-REEL7 Datasheet - Page 4

• Manufacturer Part Number: AD8014ART-REEL7
• Description: IC,Operational Amplifier,SINGLE,BIPOLAR,TSOP,5PIN,PLASTIC
• Manufacturer: Analog Devices Inc

Specifications of AD8014ART-REEL7

• Rohs Status: RoHS non-compliant
• Amplifier Type: Current Feedback
• Number Of Circuits: 1
• Slew Rate: 4600 V/µs
• -3db Bandwidth: 480MHz
• Current - Input Bias: 5µA
• Voltage - Input Offset: 2000µV
• Current - Supply: 1.15mA
• Current - Output / Channel: 50mA
• Voltage - Supply, Single/dual (±): 4.5 V ~ 12 V, ±2.25 V ~ 6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-5, SC-74A, SOT-25
• Output Type: -
• Gain Bandwidth Product: -
• Other names: AD8014ART-REEL7; AD8014ART-REEL7TR

AD8014
ABSOLUTE MAXIMUM RATINGS
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12.6 V
Internal Power Dissipation
Input Voltage Common Mode . . . . . . . . . . . . . . . . . . . . . . ± V
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . ± 2.5 V
Output Short Circuit Duration
Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C
Operating Temperature Range . . . . . . . . . . . –40°C to +85°C
Lead Temperature (Soldering 10 sec) . . . . . . . . . . . . .+300°C
ESD (Human Body Model) . . . . . . . . . . . . . . . . . . . . +1500 V
NOTES
1
2
MAXIMUM POWER DISSIPATION
The maximum power that can be safely dissipated by the AD8014
is limited by the associated rise in junction temperature. The
maximum safe junction temperature for plastic encapsulated
devices is determined by the glass transition temperature of the
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD8014 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only, functional operation of the
device at these or any other conditions above listed in the operational section of this
specification is not implied. Exposure to Absolute Maximum Ratings for any
extended periods may affect device reliability.
Specification is for device in free air at 25°C.
8-Lead SOIC Package
5-Lead SOT-23 Package
Small Outline Package (R) . . . . . . . . . . . . . . . . . . . . 0.75 W
SOT-23-5 Package (RT) . . . . . . . . . . . . . . . . . . . . . . 0.5 W
. . . . . . . . . . . . . . . . . . . . . . Observe Power Derating Curves
JA
= 155°C/W.
JA
= 240°C/W.
2
1
S
–4–
plastic. This is approximately +150°C. Even temporarily ex-
ceeding this limit may cause a shift in parametric performance
due to a change in the stresses exerted on the die by the pack-
age. Exceeding a junction temperature of +175°C may result in
device failure.
The output stage of the AD8014 is designed for large load cur-
rent capability. As a result, shorting the output to ground or to
power supply sources may result in a very large power dissipa-
tion. To ensure proper operation it is necessary to observe the
maximum power derating tables.
Ambient Temp
–40
–20
0
+20
+40
+60
+80
+100
C
Table I. Maximum Power Dissipation vs. Temperature
Power Watts
SOT-23-5
0.79
0.71
0.63
0.54
0.46
0.38
0.29
0.21
WARNING!
ESD SENSITIVE DEVICE
Power Watts
SOIC
1.19
1.06
0.94
0.81
0.69
0.56
0.44
0.31
Rev. C