CS4265-CNZR Cirrus Logic Inc, CS4265-CNZR Datasheet - Page 42

• Manufacturer Part Number: CS4265-CNZR
• Description: IC,Soundcard Circuits,LLCC,32PIN,PLASTIC
• Manufacturer: Cirrus Logic Inc

42
6.12.2 Invert DAC Output (Bit 5)
6.13
6.13.1 E to F C-Buffer Transfer
6.13.2 Clock Error (Bit 3)
6.13.3 ADC Overflow (Bit 1)
6.13.4 ADC Underflow (Bit 0)
Reserved
7
Status - Address 0Dh
For all bits in this register, a ‘1’ means the associated condition has occurred at least once since the register
was last read. A ‘0’ means the associated condition has NOT occurred since the last reading of the register.
Status bits that are masked off in the associated mask register will always be ‘0’ in this register. This register
defaults to 00h.
ple rate) if the signal does not encounter a zero crossing. The zero cross function is independently mon-
itored and implemented for each channel. See
Function:
When this bit is set, the output of the DAC is inverted.
Function:
Indicates the completion of an E to F C-buffer transfer. See
page 52
Function:
Indicates the occurrence of a clock error condition.
Function:
Indicates the occurrence of an ADC overflow condition.
Function:
Indicates the occurrence of an ADC underflow condition.
Reserved
for more information.
DACSoft
6
0
0
1
1
Table 16. DAC Soft Cross or Zero Cross Mode Selection
Reserved
DACZeroCross
5
0
1
0
1
EFTC
4
Changes to affect immediately
Zero Cross enabled
Soft Ramp enabled
Soft Ramp and Zero Cross enabled (default)
Table
ClkErr
16.
3
“Channel Status Buffer Management” on
Mode
Reserved
2
ADCOvfl
1
ADCUndrfl
CS4265
DS657F2
0