CS42L52-CNZR Cirrus Logic Inc, CS42L52-CNZR Datasheet - Page 71

• Manufacturer Part Number: CS42L52-CNZR
• Description: IC,Soundcard Circuits,LLCC,40PIN,PLASTIC
• Manufacturer: Cirrus Logic Inc
• Type: Stereo Audior

Specifications of CS42L52-CNZR

• Data Interface: Serial
• Resolution (bits): 24 b
• Number Of Adcs / Dacs: 1 / 1
• Sigma Delta: Yes
• Dynamic Range, Adcs / Dacs (db) Typ: 99 / 98
• Voltage - Supply, Analog: 1.65 V ~ 2.63 V
• Voltage - Supply, Digital: 1.65 V ~ 2.63 V
• Operating Temperature: -40°C ~ 105°C
• Mounting Type: Surface Mount
• Package / Case: 40-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1580 - REFERENCE DESIGN FOR CS42L52598-1508 - BOARD EVAL FOR 42LDB1 CODEC598-1505 - BOARD EVAL FOR CS42L52 CODEC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DS680F1
6.36.2 DSP Engine Overflow (Read Only)
6.36.3 PCMx Overflow (Read Only)
6.36.4 ADCx Overflow (Read Only)
6.37
6.37.1 Battery Compensation
6.37.2 VP Monitor
BATTCMP
7
Battery Compensation (Address 2Fh)
Indicates the over-range status in the DSP data path.
Indicates the over-range status in the PCM mix data path.
Indicates the over-range status in the ADC signal path.
Configures automatic adjustment of the speaker volume when VP deviates from VPREF[3:0].
Configures the internal ADC that monitors the VP voltage level.
Notes:
1. The internal ADC that monitors the VP supply is enabled automatically when BATTCMP is enabled,
2. When enabled, VPMONITOR remains enabled regardless of the PDN bit setting.
DSPxOVFL
0
1
Application:
PCMxOVFL
0
1
Application:
ADCxOVFL
0
1
Application:
BATTCMP
0
1
Application:
VPMONITOR
0
1
regardless of the VPMONITOR setting. Conversely, when BATTCMP is disabled, the ADC may be
enabled by enabling VPMONITOR; this provides a convenient battery monitor without enabling
battery compensation.
VPMONITOR
6
DSP Overflow Status:
No digital clipping has occurred in the data path after the DSP.
Digital clipping has occurred in the data path after the DSP.
“Analog Outputs” on page 29
PCM Overflow Status:
No digital clipping has occurred in the data path of the PCM mix
of the DSP.
Digital clipping has occurred in the data path of the PCM mix of the DSP.
“Analog Outputs” on page 29
ADC Overflow Status:
No clipping has occurred anywhere in the ADC signal path.
Clipping has occurred in the ADC signal path.
“Analog Inputs” on page 26
Automatic Battery Compensation
Disabled
Enabled
“Maintaining a Desired Output Level” on page 34
VP ADC Status
Disabled
Enabled
Reserved
5
Reserved
4
5/13/08
VPREF3
3
VPREF2
(“PCM Mixer Channel x Volume” on page
2
VPREF1
1
CS42L52
VPREF0
0
58)
71