C200H-DIN01 Omron, C200H-DIN01 Datasheet - Page 12

• Manufacturer Part Number: C200H-DIN01
• Description: C200H DIN RAIL ADAPTER
• Manufacturer: Omron

Specifications of C200H-DIN01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

CS1D Programmable Controller
CPU Rack
J System Configuration
Note: Observe the following precautions when configuring a system.
J CS1D CPU Racks
Note:
Name
1
2
3
4
C--218
S
S
S
Duplex unit
CS1D CPUs
(with Duplex inner board)
CS1D Power
supply unit
Duplex CPU backplane
1. A Duplex System including an Inner Board can be used with CS1D CPUs with lot numbers of 030422 (manufactured April 22,
2. When Inner Boards are used in a duplex configuration, one Duplex Inner Board must be mounted in each CPU. Non--duplex
3. When using a Memory Card in Duplex Mode, mount it in the active CPU. (Duplex Memory Card operation is not possible.)
4. In Simplex Mode, the single CPU can be mounted to either the right or the left slot. A Duplex Unit is required in either case.
CS1D--
CS--series and C200H Expansion Backplanes cannot be connected. CS1D-series Backplanes must be used.
C200H I/O and communication modules cannot be used. (They cannot be mounted to CPU Racks, Expansion
Racks, or Long-distance Expansion Racks.)
2003) or later.
Inner Boards cannot be used.
Duplex EM File Memory operation is possible.
Programmable Controller
models must be used for all CPUs, Power Supply Units, and Backplanes.
Model
CS1D-DPL01
CS1D-CPU
CS1D-PA207R
CS1D-BC052
CS1D
H
Contents
The duplex unit is the unit that controls duplex
system operation. It monitors for errors and
switches operation when an error occurs.
CS1D CPUs are designed especially for a duplex
system. Two CPUs of the identical model are
mounted in a duplex system.
If the inner board is to be configured for duplex op-
eration, two duplex inner boards are also
mounted. In a simplex system (i.e., operation by a
single CPU), only one CPU is mounted.
CS1D Power supply units are designed especially
for a duplex system. Two power supply units are
mounted to a CPU rack, expansion rack or long
distance expansion rack for a duplex power sup-
ply configuration. When not configuring a duplex
power supply only one power supply unit is
mounted.
The duplex CPU backplane is used in a CS1D du-
plex system. It allows duplex CPUs, duplex power
supplies and duplex communications units to be
mounted and enables online replacement of units.