SJ5705BLACK 3M, SJ5705BLACK Datasheet - Page 6

• Manufacturer Part Number: SJ5705BLACK
• Description: FEET, STICK ON, BLACK, PK10
• Manufacturer: 3M

Specifications of SJ5705BLACK

• Overall Length: 31.75mm
• External Width: 31.75mm
• Colour: Black
• External Depth: 31.75mm
• External Diameter: 31.75mm
• External Length / Height: 6.1mm
• Internal Diameter: 31.75mm
• Pack: RoHS Compliant
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes

3M
Molded Shapes Series
SJ-5000 • SJ-5200 • SJ-5300 • SJ-5400 • SJ-5500 • SJ-5700 • SJ-6100
Application Techniques
Environmental
Exposure
™
Bumpon
™
Protective Products
To obtain maximum adhesion, surfaces must be unified, dry, and free of
contaminants. Surface contact is essential to adhesive performance. To maximize
contact on a substrate:
• Clean surfaces with low strength solvent such as isopropyl alcohol (rubbing
• Apply firm pressure to help increase the cold flow and contact of the adhesive with
• Allow time (dwell) to increase the surface contact and adhesion (see illustrations
*Note: Be sure to follow the manufacturer’s precautions and directions for use when
Adhesive
Surface Contact
Colored and transparent 3M™ Bumpon™ Protective Products are intended for
interior applications where resilience and other physical properties will remain
unchanged. When exposed to UV light for extended periods some slight
discoloration or yellowing may occur.
Bumpon products may be used outdoors in a protected area with some discoloration
possible; colored Bumpon products may chalk.
Simultaneous exposure to high humidity and temperature may degrade (soften) the
Bumpon product urethane.
alcohol) or heptane.*
the substrate.
below).
using solvents.
- 6 -
Rubber Adhesive (R-30) vs. Acrylic
Adhesive (A-20) Bond Build Up