Locator Plate 3443-112 ™ 3M Platens 3442-44, 3442-1A ™ Instructions for the assembly of 3M Connectors 8250 and 8350 1.0 General 3M manual and pneumatic assembly presses and accessory assembly equipment are recommended for the termination ...
Procedures for Set Up: 2.1 Adjust the shut height setting (see Figures 2 through 4). Adjustment Shaft Mount Platen Clip 3M cable types can be assembled to either connector with the Locator Plate 3443-112. 3.0 Procedures for Adjusting Shut ...
Install the 3M Locator Plate and the ™ appropriate platen on the assembly press. The platen should be positioned parallel with the connector body and cover. Note: See the chart on page 1 for shut height settings. 4.0 Procedures ...
Lower the ASSEMBLY PRESS HANDLE firmly to complete the Cable/Connector Assembly. (See Figure 8.) 4.6 Raise the press handle and remove the completed assembly. Visually inspect to ensure that: a. Cover is fully seated and parallel with the body. ...