863743-1 TE Connectivity, 863743-1 Datasheet - Page 3

• Manufacturer Part Number: 863743-1
• Description: Cable Assembly Lead 0.305m 22AWG 3 POS LGH PL
• Manufacturer: TE Connectivity

Specifications of 863743-1

• Connector Type: 3POS LGH
• Cable Type: Lead
• Gender: PL
• Cable Length: 0.305 m
• Rohs Compliant: YES
• Housing Material: Silicone Rubber
• Contact Material: Copper Alloy
• Contact Plating: Gold over Nickel
• Insert / Contact Gender: Male
• Number Of Positions / Contacts: 3
• Product Type: Plug Connectors
• Wire Gauge Range: 22
• Wire Size (mm² [awg]): 22
• Operating Voltage (kvdc): 7.5
• Assembly Length (mm [in]): 304.80 [12.000]
• Number Of Positions: 3
• Wire Color: Brown
• Wire Insulation: Silicon Rubber
• Contact Type: Socket
• Contact Size: 22
• Contact Base Material: Copper Alloy
• Contact Plating, Mating Area, Material: Gold per MIL-G-45204
• Contact Sleeve Material: Stainless Steel
• Connector Style: Plug
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Test Voltage: 12 KVDC at 10,000 feet and -15°C to +85°C
• Lead Free Status / Rohs Status: Details

Rev O2
Vibration, sinusoidal.
Mechanical shock.
Durability.
Contact engaging force.
Contact separating force.
Therm al shock.
Hum idity, steady state.
Tem perature life.
Test Description
No discontinuities of 10
m icroseconds or longer duration.
See Note.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
See Note.
20 ounces m axim um .
3 ounces m inim um .
See Note.
See Note.
See Note.
ENVIRONMENTAL
MECHANICAL
Figure 1 (cont)
Requirem ent
EIA-364-28, Test Condition I.
Subject m ated specim ens to 10-55-
10 Hz traversed in 1 m inute with 1.5
m m [.06 in] m axim um total
excursion. 2 hours in each of 3
m utually perpendicular planes.
EIA-364-27, Method H.
Subject m ated specim ens to 30 G's
half-sine shock pulses of 11
m illiseconds duration. 3 shocks in
each direction applied along 3
m utually perpendicular planes, 18
total shocks.
EIA-364-9.
Mate and unm ate gold plated
specim ens for 500 cycles and tin
plated specim ens for 50 cycles at a
m axim um rate of 500 cycles per
hour.
AMP Spec 109-35.
Measure force necessary to
engage using gage 2 to a depth of
.19 inch for 1/2I and 1/2LI and .25
inch for 1I, 1LI, 2I, 3I and 4I.
See Figure 4.
AMP Spec 109-35.
Size 3 tim es using gage 2. Then
insert gage 1 to depth of .19 inch
for 1/2I and 1/2LI and .25 inch for
1I, 1LI, 2I, 3I and 4I and m easure
force necessary to separate.
See Figure 4.
EIA-364-32.
Subject specim ens to 5 cycles
between -55 and 125 C.
EIA-364-31, Method II, Condition A.
Subject specim ens to 40 C and 90
to 95% RH for 96 hours.
EIA-364-17, Method A, Test
Condition 5, Test Tim e Condition A.
Subject m ated specim ens to 125 C
for 96 hours.
Procedure
108-36033
3 of 6