R1G175-AB41-02 EBM-Papst Industries Inc, R1G175-AB41-02 Datasheet - Page 2

• Manufacturer Part Number: R1G175-AB41-02
• Description: IMPELLER MTRZD 175X62MM 48VDC
• Manufacturer: EBM-Papst Industries Inc
• Series: R1G175r
• Type: Impellersr

Specifications of R1G175-AB41-02

• Current Type: DC
• Supply Voltage: 48 V
• Bearing Type: Ball
• Termination Style: 65 dB(A)
• Noise: 65 dB(A)
• Fan Type: Motorized Impellers
• Size / Dimension: Round - 175mm Dia x 69mm W
• Voltage - Rated: 48VDC
• Power (watts): 34.0W
• Features: PWM Control; Speed Sensor (Tach)
• Rpm: 3100 RPM
• Air Flow: 330.0 CFM (9.34m³/min)
• Termination: 4 Wire Leads
• Weight: 1.6 lbs (725.7g)
• Current Rating: 0.800A
• Voltage Range: 36.0 ~ 57.0VDC
• Operating Temperature: -13 ~ 140°F (-25 ~ 60°C)
• Airflow: 330 CFM
• Frame Dimensions (mm): 175 mm x 62 mm
• Power Rating: 34 W
• External Depth: 69mm
• External Diameter: 175mm
• Flow Rate: 330CFM
• Noise Rating: 65dBA
• Power Connection Type: Lead Wires
• Brand/series: R1G175 Series
• Diameter, Outer: 175 mm
• Dimensions: 6.9"Dia.x2.72"W
• Material, Impeller: Plastic
• Noise Level: 65 dBA
• Power, Rating: 34 W
• Size: Φ 175 mm (6.89")
• Special Features: Tachometer
• Standards: UL Listed, CSA Certified, VDE Approval
• Temperature, Ambient: 60 °C (Max.)
• Temperature, Operating, Maximum: +60 °C
• Voltage, Rating: 48 VDC
• Diameter: 175mm
• Flow Rate - Imperial: 330CFM
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Static Pressure: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 381-1159; R1G175-AB41-02; R1G175AB4102

1.5 Safety and protective functions
1.6 Electromagnetic radiation
Interference from electromagnetic radiation is possible, e.g. in conjunction
with open and closed-loop control devices.
If unacceptable emission intensities occur when the fan is installed,
appropriate shielding measures have to be taken by the user.
1.7 Mechanical movement
1.8 Emission
Item no.: 50066-5-9970 · Revision status: KM70943 · Print-out on 27/08/2010 · Created by P. Praktikant (PR- ) · Page 2 of 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · 74673 Mulfingen · Phone: [phone] · Fax: [phone] · www.ebmpapst.com · [e-mail]
R1G175-AB41-02
DANGER
Missing safety device and non-functioning safety device
If there is no safety device, you could be seriously injured, for
example by reaching into the running device with your hands.
NOTE
Electrical or electromagnetic interferences after
integrating the device in installations on the customer's
side.
DANGER
Rotating device
Body parts coming into contact with the rotor and impeller can
be injured.
WARNING
Rotating device
Long hair, loose items of clothing and jewellery could become
entangled and pulled into the device. You could be injured.
WARNING
Depending on the installation and operating conditions,
a sound pressure level greater than 70 dB(A) may arise.
Danger of noise-induced hearing loss
supply voltage and secure the latter from being switched on
again.
Wait until the device stops.
Operate the device only with a fixed and isolating safety
protection and a fixed guard grille.
The guard must withstand the kinetic energy of a fan blade.
The device is a built-in component. You, the owner/
operator, are responsible for providing adequate protection for
the device.
Instantly stop the device once you detect a missing or
ineffective protective feature.
Verify that the entire setup is EMC compliant.
Secure the device against accidental contact.
Before working on the system/machine, wait until all
parts have come to a standstill.
Do not wear any loose clothing or jewellery while working
on rotating parts.
Protect long hair by wearing a cap.
Take appropriate technical safety measures.
Protect operating personnel with appropriate safety
equipment, e.g. hearing protection.
Operating instructions
1.9 Hot surface
1.10 Transport
1.11 Storage
Store the device in a dry and weatherproof manner in the original
packing in a clean environment.
Protect the device from environmental impacts and dirt until the final
installation.
We recommend storing the device for a maximum of one year.
Maintain the storage temperature, see
chapter 3.5 Storage conditions.
1.12 Disposal
When disposing of the device, please comply with all relevant
requirements and regulations applicable in your country.
CAUTION
High temperature at the electronics enclosure
Danger of burn injuries
NOTE
Transport of device
Ensure that sufficient protection against accidental contact is
provided.
Transport the device in its original packaging only.
Secure the device so that it does not slip, e.g. by using a
clamping strap.