CZP2BFTTE500P KOA Speer Electronics, CZP2BFTTE500P Datasheet - Page 8

• Manufacturer Part Number: CZP2BFTTE500P
• Description: EMI/RFI Suppressors & Ferrites 1206 50ohm 25%
• Manufacturer: KOA Speer Electronics
• Type: Power Beadr
• Series: CZPr

Specifications of CZP2BFTTE500P

• Shielding: Shielded
• Test Frequency: 100MHz
• Impedance: 50Ohm
• Inductance: Not RequireduH
• Technology: Multi-Layer
• Core Material: Ferrite
• Tolerance (+ Or -): 25%
• Dc Resistance: 25mOhm
• Case Size (inches): 1206in
• Operating Temp Range: -55C to 125C
• Dc Current: 4A
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 1.3mm
• Product Depth (mm): 1.8mm
• Product Length (mm): 3.4mm
• Military Standard: Not Required
• Failure Rate: Not Required
• Dimensions: 0.5 mm Dia. x 1.6 mm W x 3.2 mm L x 1.1 mm H
• Product: Chip Ferrite Beads
• Tolerance: 25 %
• Maximum Dc Current: 3000 mAmps
• Maximum Dc Resistance: 0.025 Ohms
• Operating Temperature Range: - 55 C to + 125 C
• Package / Case: 1206 (3216 metric)
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Compliant

5. Characteristics (continued)
Bolivar Drive
Spec ific ation s g iven herein m ay be cha nged a t any tim e w itho ut pr ior not ice. Pleas e c onf ir m te chnic al s pec if ica tions before you order an d/or u se.
Item
Mechanical Shock
Vibration
Thermal Shock
Load Humidity
Life Test
P.O. Box 547
Requirement
Appearance: There shall be no physical or
mechanical damage.
Impedance: Relative to initial value before test
±10%.
Impedance: Relative to initial value ±10%.
Appearance: There shall be no physical or
mechanical damage.
Impedance: Relative to initial value ±20%.
DCR: The DCR shall not exceed initial specified
value.
Testing of the parts will be made at 0 hours, 250
hours and 500 hours. Before testing, the parts
shall be allowed to cool to room temperature for
24 hours.
Appearance: There shall be no physical or
mechanical damage.
Impedance: Relative to initial value ±15%.
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
Appearance: There shall be no physical or
mechanical damage
Impedance: Relative to initial value ±15%
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
Bradford, PA 16701
USA
814-362-5536
Conditions
Force: 50G
Time: 11 msec
There shall be 3 shocks in each of 6 directions
(18 shocks total).
Only endurance conditioning by sweeping shall
be made. The entire frequency range from
10-2,000Hz and return to 10Hz in 20
minutes (this shall constitute one cycle).
Amplitude: 1.5mm
The test shall have a 15G peak and shall be
applied for a period of 4 hours (12 cycles)
in each of 3 mutually perpendicular directions
(a total of 36 cycles within a total of 12 hours).
Steps 1 thru 5 constitute one complete cycle
and the test shall consist of a total of 500
cycles.
Temperature: 85°C ±2°C
Relative Humidity: 85%
Time: 1,000 hours total
Apply: 100% rated current
Temperature: 85°C ±2°C
Time: 1,000 hours total
Apply: 100% rated current
3-transfer
5-transfer
1-start
2-hold
4-hold
Fax [phone]
Step
Temperature
+105°C ±2°C 30 min ±5 min
-40°C ±2°C
-40°C ±2°C 30 min ±5 min
—
—
www.koaspeer.com
0.5 min max.
0.5 min max.
PAGE 8 OF 10
—
Time
SS-220 R12