SLCF128M2PUI STEC, SLCF128M2PUI Datasheet - Page 50

• Manufacturer Part Number: SLCF128M2PUI
• Manufacturer: STEC
• Type: CompactFlashr

Specifications of SLCF128M2PUI

• Density: 128MByte
• Operating Supply Voltage (typ): 3.3/5V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Package Type: Not Required
• Mounting: Socket
• Pin Count: 50
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.97/4.5V
• Operating Supply Voltage (max): 3.63/5.5V
• Programmable: Yes
• Lead Free Status / RoHS Status: Compliant

SLCFxxx(G)M2PU(I)
Datasheet
8.0 SMART Feature Set
Self-Monitoring, Analysis, and Reporting Technology (the SMART feature set) is used to protect the user
from unscheduled downtime. By monitoring and storing critical performance and calibration parameters,
SMART feature set devices attempt to predict the likelihood of near-term degradation or fault condition.
Informing the host system of a negative reliability condition allows the host system to warn the user of the
impending risk of a data loss and advise the user of appropriate action.
Note: The CF Card is SMART ready and the SMART feature set can be implemented per special request.
8.1
S




The CF Card does not support SMART self test or error logging. The following indicators for the SMART
feature set are set to 0:


8.2
A command code of 0xB0 with a SMART command selected in the Feature Register invokes a SMART
command. Refer to Table 30 for the Feature Register values associated with each SMART command.
upport for the SMART feature set is indicated by the Identify Command response as follows:
Word 82 bit 0 – a ―1‖ indicates that SMART feature set is supported.
Word 84 bit 1 – a ―0‖ indicates that SMART self test not supported.
Word 84 bit 0 – a ―0‖ indicates SMART error logging not supported.
Word 85 bit 0 – a ―1‖ indicates SMART feature set has been enabled via the SMART ENABLE OPERATIONS
command, and a ―0‖ indicates the SMART feature set has been disabled via the SMART DISABLE OPERATIONS
command
Word 87 bit 1 – a 0 indicates that SMART self test is not enabled.
Word 87 bit 0 – a 0 indicates that SMART error logging is not enabled.
Feature Register
SMART Support and Identify Command
SMART Commands
DAh
D0h
D1h
D2h
D8h
D9h
Command
SMART READ ATTRIBUTE DATA
SMART READ ATTRIBUTE THRESHOLDS
SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE
SMART ENABLE OPERATIONS
SMART DISABLE OPERATIONS
SMART RETURN STATUS
Table 30: Supported SMART Commands
61000-05610-108, April 2009
Notes
Optional – supported
OBS – supported
Mandatory
Mandatory
Mandatory
Mandatory
CompactFlash Card
50