PS2701-1-A California Eastern Labs, PS2701-1-A Datasheet - Page 9

• Manufacturer Part Number: PS2701-1-A
• Manufacturer: California Eastern Labs

Specifications of PS2701-1-A

• Input Type: DC
• Output Type: DC
• Output Device: Transistor
• Number Of Elements: 1
• Reverse Breakdown Voltage: 6V
• Forward Voltage: 1.4V
• Forward Current: 50mA
• Collector-emitter Voltage: 40V
• Package Type: SOP
• Collector Current (dc) (max): 80mA
• Isolation Voltage: 3750Vrms
• Power Dissipation: 150mW
• Collector-emitter Saturation Voltage: 0.3V
• Current Transfer Ratio: 300%
• Pin Count: 4
• Mounting: Surface Mount
• Operating Temp Range: -55C to 100C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Compliant

NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
(2) Wave soldering
(3) Soldering by soldering iron
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Peak temperature (lead part temperature)
• Time (each pins)
• Flux
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120°C
(preheating)
120±30 s
Data Sheet PN10240EJ03V0DS
350°C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
180°C
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
maximum chlorine content of 0.2 Wt% is recommended.)
Rosin flux containing small amount of chlorine (The flux with a
Time (s)
(heating)
to 60 s
to 10 s
260°C MAX.
220°C
PS2701-1
9