GP1A74A1 Sharp Electronics, GP1A74A1 Datasheet - Page 4

• Manufacturer Part Number: GP1A74A1
• Manufacturer: Sharp Electronics
• Type: Transmissiver

Specifications of GP1A74A1

• Number Of Elements: 1
• Gap Width: 5mm
• Pin Count: 3
• Mounting: Snap in
• Operating Temp Range: -20C to 75C
• Operating Temperature Classification: Commercial
• Lead Free Status / RoHS Status: Not Compliant

(Precautions for Operation)
1) In this product, the PWB is fixed with a hook, and cleaning solvent may remain inside the case;
2) Remove dust or stains, using an air blower or a soft cloth moistened in cleaning solvent.
3) In order to stabilize power supply line, connect a by-pass capacitor of more than 0.01 F between V and GND
therefore, dip cleaning or ultrasonic cleaning are prohibited.
However, do not perform the above cleaning using a soft cloth with solvent in the marking portion.
In this case, use only the following type of cleaning solvent for wiping off;
When the cleaning solvents except for specified materials are used, please contact us.
near the device.
As for other general precautions, please refer to the chapter "Precautions for Use".
Ethyl alcohol, Methyl alcohol, Isopropyl alcohol,
GP1A74A/GP1A74A1
CC