MCIMX31LCVKN5D Freescale, MCIMX31LCVKN5D Datasheet - Page 76

• Manufacturer Part Number: MCIMX31LCVKN5D
• Manufacturer: Freescale

Specifications of MCIMX31LCVKN5D

• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Compliant

Electrical Characteristics
The DISP#_IF_CLK_PER_WR, DISP#_IF_CLK_PER_RD, HSP_CLK_PERIOD,
DISP#_IF_CLK_DOWN_WR, DISP#_IF_CLK_UP_WR, DISP#_IF_CLK_DOWN_RD,
DISP#_IF_CLK_UP_RD and DISP#_READ_EN parameters are programmed via the
DI_DISP#_TIME_CONF_1, DI_DISP#_TIME_CONF_2 and DI_HSP_CLK_PER Registers.
4.3.15.5.3
The IPU supports the following types of asynchronous serial interfaces:
Figure 60
DISPB_D#_CS signal and the straight polarity of the DISPB_SD_D_CLK signal.
For this interface, a bidirectional data line is used outside the device. The IPU still uses separate input and
output data lines (IPP_IND_DISPB_SD_D and IPP_DO_DISPB_SD_D). The I/O mux should provide
joining the internal data lines to the bidirectional external line according to the IPP_OBE_DISPB_SD_D
signal provided by the IPU.
Each data transfer can be preceded by an optional preamble with programmable length and contents. The
preamble is followed by read/write (RW) and address (RS) bits. The order of the these bits is
programmable. The RW bit can be disabled. The following data can consist of one word or of a whole
burst. The interface parameters are controlled by the DI_SER_DISP1_CONF and DI_SER_DISP2_CONF
Registers.
Figure 61
data lines both inside and outside the device.
76
DISPB_SD_D_CLK
DISPB_D#_CS
DISPB_SD_D
•
•
•
•
3-wire (with bidirectional data line)
4-wire (with separate data input and output lines)
5-wire type 1 (with sampling RS by the serial clock)
5-wire type 2 (with sampling RS by the chip select signal)
depicts timing of the 4-wire serial interface. For this interface, there are separate input and output
depicts timing of the 3-wire serial interface. The timing images correspond to active-low
Serial Interfaces
1 display IF
Figure 60. 3-Wire Serial Interface Timing Diagram
clock cycle
MCIMX31/MCIMX31L Technical Data, Rev. 4.3
Preamble
, Functional Description
RW
RS
D7
D6
D5
Input or output data
D4
D3
Freescale Semiconductor
D2
1 display IF
clock cycle
D1
D0