GP1S74P Sharp Electronics, GP1S74P Datasheet - Page 5

• Manufacturer Part Number: GP1S74P
• Manufacturer: Sharp Electronics
• Type: Transmissiver

Specifications of GP1S74P

• Number Of Elements: 1
• Output Device: Phototransistor
• Gap Width: 5mm
• Reverse Breakdown Voltage: 6V
• Collector-emitter Voltage: 35V
• Forward Current: 50mA
• Package Type: Compact
• Collector Current (dc) (max): 20mA
• Power Dissipation: 75mW
• Fall Time: 20000ns
• Rise Time: 15000ns
• Pin Count: 3
• Mounting: Snap in
• Operating Temp Range: -25C to 85C
• Operating Temperature Classification: Commercial
• Lead Free Status / RoHS Status: Not Compliant

1. It is recommended to mount the photointerrupters on the shear droop surface (punch side) of the mounting plate (metal plate).
2. Mounting workability, shaking after mounting and mounting strength depend on the corner radius of the mounting plate and state of punching.
3. General dimensional tolerances shall be ± 0.1 mm.
(Precautions for Operation)
1) In this product, the PWB is fixed with a hook, and cleaning solvent may remain inside the case;
2) Remove dust or stains, using an air blower or a soft cloth moistened in cleaning solvent.
General mounting type
Reverse insertion
preventive type
Determine the mounting hole dimensions after check on an actual machine.
However, do not perform the above cleaning using a soft cloth with solvent in the marking portion.
In this case, use only the following type of cleaning solvent for wiping off;
When the cleaning solvents except for specified materials are used, please contact us.
therefore, dip cleaning or ultrasonic cleaning are prohibited.
As for other general precautions, please refer to the chapter "Precautions for Use".
Recommended Mounting Hole Drawing(Dimensions shown are recommended values.
Use the photointerrupters after checking the mounting strength and others on an actual machine.)
Ethyl alcohol, Methyl alcohol, Isopropyl alcohol
2.4
Plate thickness : 1.6 mm
Plate thickness : 1.6 mm
7.7
7.7
2.4
12 - R0.1± 0.1
8 - R0.1± 0.1
2.4
Plate thickness : 1.2 mm
Plate thickness : 1.2 mm
7.5
7.5
2.4
12 - R0.1± 0.1
8 - R0.1± 0.1
2.4
Plate thickness : 1.0 mm
Plate thickness : 1.0 mm
7.5
7.5
2.4
12 - R0.1± 0.1
8 - R0.1± 0.1
(Unit : mm)
GP1S73P/GP1S74P