SJ5916 3M, SJ5916 Datasheet - Page 5

• Manufacturer Part Number: SJ5916
• Description: BUMPON ROLL 1.6MM 9"X36YD BLACK
• Manufacturer: 3M
• Series: SJ-5900r

Specifications of SJ5916

• Shape: Rectangular, Flat - Customizable
• Color: Black
• Size: Roll - 108' L x 9.000" W x 0.062" H (32.92m x 228.60mm x 1.57mm) 1/16" H
• Size - Visible: Roll - 108' L x 9.000" W x 0.062" H (32.92m x 228.60mm x 1.57mm) 1/16" H
• Mounting Type: Adhesive - Acrylic
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 00-021200-86306-6; 70-0704-2860-5

Bumpon™ Resilient Rollstock
SJ-5800 SJ-5900 SJ-6000 SJ-6200 Series
Adhesive Description
Adhesive Performance
Natural Rubber (R-30) – Used in the construction of SJ-5800 Series products. This high tack adhesive system
provides excellent initial adhesion and has the capability of providing excellent adhesion to a wide variety of surfaces
including many low surface energy surfaces such as polypropylene, polyethylene and powder coated paints. This
adhesive system shows reduced shear properties at elevated temperatures (see figure below on Static Shear Strength).
Acrylic (A-20) – Used in construction of SJ-5900 and SJ-6000 Series products. This high strength adhesive system
provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many
high surface energy substrates such as metals, ABS, polycarbonate and acrylic. When adhesion is required on low
surface energy substrates (ie., polypropylene, polyethylene, etc.) acrylic-based adhesives do not perform as well as
rubber-based adhesives.
Synthetic Rubber (R-25) – Used in the construction of SJ-6200 Series products. This very high tack adhesive system
provides excellent initial adhesion and has the capability of providing excellent adhesion to a wide variety of surfaces
including many low surface energy surfaces such as polypropylene, polyethylene and powder coated paints. This
adhesive system shows reduced shear properties at elevated temperatures (see figure below on Static Shear Strength).
The following figure on static shear and table on peel adhesion provide representative performance
characteristics of the adhesive systems used in the construction of SJ-5800, SJ-5900, SJ-6000 and SJ-6200 Series
Rollstock products.
Static Shear Strength
3M Test Method – Inclined Plane Static Shear Test Method; 30 incline, tested on ABS using ½ inch
diameter die cuts from SJ-5816, SJ-6016 and SJ-6216 Rollstock products. 2 lb. Load per ½ inch diameter
die cut. Measured time of creep: 15 minutes.
90 Peel Adhesion
Substrate
Polypropylene
Polystyrene
ABS
Stainless Steel
Aluminum
3M Test Method TM-2011; 72 hour dwell, ½ inch wide samples pulled at 12 inches per minute. Testing
completed using SJ-5816, SJ-6016 and SJ-6216 Rollstock products.
Note: This technical information and data should be considered representative or typical only and
should not be used for specification purposes.
SJ-5800 Series
Natural Rubber
R-30
25
25
25
22
22
Peel Force, oz. Per ½ inch
SJ-5900 Series
SJ-6000 Series
Acrylic
A-20
11
25
25
25
3
Synthetic Rubber
SJ-6200 Series
Page 5 of 6
R-25
52
55
55
55
55