111623-1 TE Connectivity, 111623-1 Datasheet - Page 2

• Manufacturer Part Number: 111623-1
• Description: WIRE-BOARD CONN, RECEPTACLE, 10POS, 2MM
• Manufacturer: TE Connectivity
• Series: 2.0 [.079] AMP-LATCHr

Specifications of 111623-1

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Mounting Type: PCB Straight Thru Hole
• Connector Type: Wire-to-Board
• Rohs Compliant: No
• Product Line: AMP-LATCH
• Termination Method To Wire/cable: IDC
• Ul File Number: E28476
• Csa File Number: LR 7189
• Contact - Rated Current (a): 0.5
• Operating Voltage Reference: AC
• Operating Voltage (vac): 125
• Wire/cable Size (awg): 28
• Wire/cable Size (mm²): 0.08
• Wire/cable Size (cma): 158
• Profile Height (y-axis) (mm [in]): 8.48 [0.3339]
• Number Of Positions: 10
• Centerline (mm [in]): 2.00 [0.079]
• Row-to-row Spacing (mm [in]): 2.54 [0.100]
• Number Of Rows: 2
• Mating Retention: Without
• Length (x-axis) (mm [in]): 15.16 [0.5968]
• Width (z-axis) (mm [in]): 5.58 [0.2197]
• Contact Design: Single Beam
• Contact Type: Socket
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold or Palladium Nickel or Performance Based
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.762 [30]
• Connector Style: Receptacle
• Mating Alignment: With
• Mating Alignment Type: Polarization
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Ul Voltage Rating (vac): 125
• Operating Temperature (°c [°f]): -65 – +105 [-85 – +221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.71 – 0.87 [0.028 – 0.034]
• Application Use: Wire-to-Board
• Contact Transmits (typical Application): Signal (Data)
• Packaging Method: Tray

3.3.
3.4.
3.5.
Examination of product.
Termination resistance, dry circuit.
Dielectric withstanding voltage.
Insulation resistance.
Vibration, random.
Physical shock.
Rev C
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests are performed at ambient environmental
conditions per Test Specification 109-1.
Test Requirements and Procedures Summary
Test Description
Voltage: 125 volts AC
Current: .5 ampere, signal applications
Temperature:
NOTE
Continuous maximum rating for individual contacts cannot be applied simultaneously to
all contacts as physical and thermal material properties may be exceeded. System
design shall ensure that currents applied during steady state or transient conditions do
not create internal hot spots that exceed temperature designated by the connector
specification.
-65 to 105°C
Meets requirements of product
drawing and Application
Specification 114-40038.
25 milliohms maximum.
1 minute hold with no breakdown or
flashover.
5000 megohms minimum initial.
1000 megohms minimum final.
No discontinuities greater than 1
microsecond.
See Note.
No discontinuities greater than 1
microsecond.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
Visual, dimensional and
inspection plan.
TE Spec 109-6-6.
Subject mated contacts assembled
in housing to 20 millivolt open circuit
at 100 milliamperes.
See Figure 4.
TE Spec 109-29-1.
300 volts AC (rms).
Test between adjacent contacts of
unmated connector assemblies.
TE Spec 109-28-3.
Test between adjacent contacts of
unmated connector assemblies.
TE Spec 109-21-5.
Subject mated connectors to 23.91
G's rms for 15 minutes.
See Figure 5.
TE Spec 109-26-7.
Subject mated connectors to 50 G's
sawtooth shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 5.
functional per applicable quality
Procedure
108-1372
2 of 6