M8134-HC-12P2 TE Connectivity, M8134-HC-12P2 Datasheet - Page 3

• Manufacturer Part Number: M8134-HC-12P2
• Description: M8134-HC-12P2=CONTACT AU PLT.
• Manufacturer: TE Connectivity

Specifications of M8134-HC-12P2

• Rohs Compliant: YES
• Socket Length (mm [in]): 4.06 [0.160]
• Sealant: Without
• Proprietary Name: HOLTITE
• Recommended Hole Size (mm [in]): 2.08 [0.082]
• Mating Pin Dia. Range (mm [in]): 0.89 – 1.14 [0.035 – 0.045]
• Spring Material: Beryllium Copper
• Contact Spring Plating: Gold
• Contact Base Material: Beryllium Copper
• Insertion Method: Hand/Semi-Automatic
• Government/industry Qualification: Yes
• Government/industry Part Number: M83505/6-004
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Application: Production
• Packaging Method: Loose Piece

Rev B
Insertion force.
Withdrawal force.
Contact retention.
Thermal shock.
Humidity-temperature cycling.
Salt spray.
Temperature cycling.
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
330 grams maximum.
16 grams minimum.
2,267 grams minimum.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
EIA-364-13.
Measure the force necessary to
insert a .020 inch diameter polished
steel test pin at a maximum rate of
12.7 mm [.5 in] per minute.
EIA-364-13.
Measure force necessary to
withdraw a .016 inch diameter
polished steel test pin at a
maximum rate of 12.7 mm [.5 in]
per minute.
EIA-364-13.
Measure force necessary to push a
contact out of an .039 inch diameter
plated through hole.
EIA-364-32, Test Condition IV.
Subject specimens to 5 cycles
between -65 and 150° C.
EIA-364-31, Method III.
Subject specimens to 10 cycles (10
days) between 25 and 65° C at 80 to
100% RH.
EIA-364-26, Test Condition B.
Subject specimens to a 5% salt fog
mist for 48 hours.
EIA-364-32, Test Condition VII.
Except: Subject specimens to 100
cycles between -40 and 120° C,
dwell time and transition time shall
be 30 minutes (120 minute cycle).
Procedure
108-1979
3 of 5