OPI120 Optek Technology (TT electronics), OPI120 Datasheet - Page 2

• Manufacturer Part Number: OPI120
• Manufacturer: Optek Technology (TT electronics)

Specifications of OPI120

• Input Type: DC
• Output Type: DC
• Output Device: Transistor
• Number Of Elements: 1
• Reverse Breakdown Voltage: 3V
• Forward Voltage: 1.5V
• Forward Current: 150mA
• Collector-emitter Voltage: 25V
• Power Dissipation: 250mW
• Collector-emitter Saturation Voltage: 0.5V
• Current Transfer Ratio: 70%
• Pin Count: 5
• Mounting: Through Hole
• Operating Temp Range: -55C to 100C
• Operating Temperature Classification: Industrial
• Lead Free Status / Rohs Status: Compliant

Optically Coupled Isolator
OPI120, OPI123
Absolute Maximum Ratings (
Input Diode
Output Photosensor
Issue A .2
Page 2 of 3
1
2
1
Storage Temperature
Operating Temperature
Input-to-Output Isolation Voltage
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)
Forward DC Current
Reverse DC Voltage
Power Dissipation
Collector-Emitter Voltage
Emitter-Collector Voltage
Collector-Base Voltage
Power Dissipation
2
Notes:
(1) Measured with input and output leads shorted in air with a maximum relative humidity of 50%. If suitably encapsulated or oil-
(2) UL recognition is for 3750 VAC to 100° C.
(3) RMA flux is recommended. The duration can be extended to 10 seconds maximum when flow soldering.
(4) Derate linearly 2.0 mA/°C above 25°C.
(5) Derate linearly 2.67 mA/°C above 25°C.
(6) Derate linearly 3.33 mA/°C above 25°C.
OPI123
OPI120
OPI120
OPI123
OPI120
immersed, the isolation voltage is increased to 25 kV minimum.
04/08
4 - Base
3
5
5
3
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
4—Not Connected
(5)
(6)
(4)
(1)(2)
Phone: [phone] or [phone]
T
A
= 25
o
C unless otherwise noted)
Pin #
1
2
Cathode
Anode
LED
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Pin # Transistor Pin #
3
4
5
FAX: [phone] [e-mail] www.optekinc.com
Collector
Emitter
Base
(3)
3
4
5
DIMENSIONS ARE IN:
Darlington
Collector
Emitter
Open
-55° C to +125° C
-55° C to +100° C
[MILLIMETERS]
± 15 kVDC
INCHES
200 mW
250 mW
150 mA
260° C
25 V
20 V
25 V
3 V
5 V