9-1393792-7 TE Connectivity, 9-1393792-7 Datasheet - Page 121

• Manufacturer Part Number: 9-1393792-7
• Description: Electromechanical Relay DPDT 3A 12VDC 720Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 9-1393792-7

• Contact Arrangement: DPDT
• Dc Coil Voltage: 12 V
• Coil Current: 16.67 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 12V
• Contact Form: 2 Form C
• Voltage Rating (vdc): 220V
• Voltage Rating (vac): 250V
• Dropout Volt (min): 0.6VDCV
• Coil Resistance: 720Ohm
• Pick-up Voltage (max): 8.4VDC
• Maximum Power Rating: 60W/125VA
• Operate Time: 5ms
• Contact Current Rating: 3A
• Contact Material: AgNi/Au
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Unsealed
• Product Height (mm): 11mm
• Product Depth (mm): 10mm
• Product Length (mm): 20.2mm
• Operating Temp Range: -25C to 85C
• Pin Count: 8
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Package / Case: DIP
• Lead Free Status / Rohs Status: Compliant

Dimensions are shown for
reference purposes only.
Technical Information
Rated Current / Rated Voltage: 6A / 250VAC.
Dielectric Strength, Coil-to-Contact: >4,000Vrms.
Insulation Category (VDR 0110b): C / 250.
Operating Ambient Temperature: - 20 C to +55 C.
Protection Category: IP 20.
Protection Against Accidental Contact Meeting: VBG 4.
Wire Cross Section with/without Bootlace Crimp: 0.22 - 2.5mm
Terminal Torque (Nominal / Maximum): .295 / .442 ft-lb (0.4 / 0.6 Nm).
Sets - Relay in frame, mounted in socket
ST 1P3 024
ST 1P3 L12
ST 1P3 L24
ST 1P3 L48
ST 1P2 L24
Features
• Module width is 0.2 in (5.08mm).
• Narrow width permits high density packing of modules on a DIN rail.
• Jumper bars available.
• Available as a set or as individual components.
Component Parts
ST 1F 000
ST 1F L24
ST 16 016
ST 17 002
ST 17 005
ST 17 010
ST 16 040
24VDC, AgSnO
12VDC, with LED, AgSnO
24VDC, with LED, AgSnO
48VDC, with LED, AgSnO
24VDC, with LED, Au plated AgSnO
Socket without LED
Socket with LED for 12-24VDC.
Mounting frame for relay, without marking
Jumper bar, 2 pole
Jumper bar, 5 pole
Jumper bar, 10 pole
Marking plate, consiting of 100 marking tags
2
contacts
Dimensions are in inches over
(millimeters) unless otherwise
specified.
2
2
2
contacts
contacts
contacts
2
contacts
2
.
Catalog 1308242
Issued 3-03
Outline Dimensions
DIN Rail Interface Module and Accessories
for V23092 Series (SNR) Relay
PC Board Relay
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
SCHRACK
411