20-101-0522 Rabbit Semiconductor, 20-101-0522 Datasheet - Page 18

• Manufacturer Part Number: 20-101-0522
• Description: MODULE RABBITCORE RCM3220
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0522

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 3000
• Clock Speed: 44.2 MHz
• Interface Type: Ethernet, Serial
• Flash: 512 KB
• Timers: 10 x 8 bit, 1 x 10 bit
• Operating Supply Voltage: 3.15 V to 3.45 V
• Board Size: 69 mm x 47 mm x 22 mm
• Core: RCM3220
• Processor Series: RCM3200
• For Use With/related Products: RCM3220
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1098

2.3 Programming Cable
The RCM3200 is automatically in program mode when the
connector on the pro-
PROG
gramming cable is attached, and is automatically in run mode when no programming cable
is attached.
The
DIAG
connector of the programming cable may be used on header J3 of the RCM3200
with the board operating in the run mode. This allows the programming port to be used as
an application port. See Appendix E, “Programming Cable,” for more information.
Figure 6. Switching Between Program Mode and Run Mode
2.3.1 Changing from Program Mode to Run Mode
1. Disconnect the programming cable from header J3 of the RCM3200.
2. Reset the RCM3200. You may do this as explained in Figure 6.
The RCM3200 is now ready to operate in the run mode.
2.3.2 Changing from Run Mode to Program Mode
1. Attach the programming cable to header J3 on the RCM3200.
2. Reset the RCM3200. You may do this as explained in Figure 6.
The RCM3200 is now ready to operate in the program mode.
14
RabbitCore RCM3200