20-101-1215 Rabbit Semiconductor, 20-101-1215 Datasheet - Page 28

• Manufacturer Part Number: 20-101-1215
• Description: MCU RCM4050 RABBITCORE
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1215

• Module/board Type: MPU Core Module
• For Use With/related Products: RCM4050
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1145

•
22
IOCONFIG_SWITCHECHO.C
which then transmits or receives an ASCII string to/from Serial Port D when switch S2
or S3 is pressed. The echoed serial data are displayed in the Dynamic C
Note that the I/O lines that carry the Serial Port F signals are not the Rabbit 4000
defaults. The Serial Port F I/O lines are configured by calling the library function
Fconfig()
Serial Port F is configured to use Parallel Port C bits PC2 and PC3. These signals are
available on the Prototyping Board's RS-232 connector (header J4).
Serial Port D is left in its default configuration, using Parallel Port C bits PC0 and PC1.
These signals are available on the Prototyping Board's RS-232 connector (header J4).
Also note that there is one library generated by
SAMPLES\RCM4000\SERIAL
To set up the Prototyping Board, you will need to tie TxD and RxC
together and tie TxC and RxD together on the RS-232 header at J4
using the jumpers supplied in the Development Kit. (Remember that
RxC and TxC now are actually RxF and TxF.)
Once you have compiled and run this program, press and release
switches S2 or S3 on the Prototyping Board. The data echoed between the serial ports
will be displayed in the
that was generated by the Rabbit 4000
STDIO
—This program demonstrates how to set up Serial Port F,
folder for the 58 MHz RCM4100 and RCM4010.
window.
IOCONFIG.EXE
IOCONFIG.EXE
in the Dynamic C
utility program.
RabbitCore RCM4000
STDIO
window.
ser-