20-101-1255 Rabbit Semiconductor, 20-101-1255 Datasheet - Page 13

• Manufacturer Part Number: 20-101-1255
• Description: COMPUTER SINGLE-BOARD BL4S100
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1255

• Module/board Type: Single Board Computer Module
• Product: Modules
• Processor Type: BL4S100
• Sram: 512 KB
• Timers: 8 bit, 10 bit
• Number Of I/os: 20
• Backup Battery: 3 V Lithium Coin Type
• Operating Voltage: 9 V to 36 V
• Power Consumption: 2 W
• Board Size: 96 mm x 146 mm x 16 mm
• Description/function: Computer Module
• For Use With/related Products: BL4S100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1168

2.1 BL4S100 Connections
Step 1 — Connect Programming Cable
The programming cable connects the BL4S100 to the PC running Dynamic C to download
programs and to monitor the BL4S100 module during debugging.
Connect the 10-pin
PROG
connector of the programming cable to header J8 on the
BL4S100. Ensure that the colored edge lines up with pin 1 as shown. (Do not use the
DIAG
connector, which is used for monitoring only.) Connect the other end of the programming
cable to an available USB port on your PC or workstation.
Figure 2. Programming Cable Connections
Your PC should recognize the new USB hardware, and the LEDs in the shrink-wrapped
area of the USB programming cable will flash — if you get an error message, you will
have to install USB drivers. Drivers for Windows XP are available in the Dynamic C
folder — double-click
Drivers\Rabbit USB Programming Cable\WinXP_2K
to install the USB drivers. Drivers for other operating systems are available
DPInst.exe
online at www.ftdichip.com/Drivers/VCP.htm.
BL4S100 User’s Manual
11