CY7C67300-100AXI Cypress Semiconductor Corp, CY7C67300-100AXI Datasheet - Page 57

• Manufacturer Part Number: CY7C67300-100AXI
• Description: IC USB HOST/PERIPH CNTRL 100LQFP
• Manufacturer: Cypress Semiconductor Corp
• Series: EZ-Host™r
• Type: Host Programmable Embedded USBr

Specifications of CY7C67300-100AXI

• Package / Case: 100-LQFP
• Applications: USB Host/Peripheral Controller
• Core Processor: CY16
• Program Memory Type: ROM (8 kB)
• Controller Series: CY7C673xx
• Ram Size: 16K x 8
• Interface: SPI Serial, USB, HPI
• Number Of I /o: 32
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Temperature Range: - 40 C to + 85 C
• Supply Current: 80 mA
• Operating Supply Voltage: 3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: CY4640 - KIT MASS STORAGE REF DESIGNCY3663 - KIT DEV EZ-OTG/EZ-HOST
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-1865; CY7C67300-100AXI

Transmit Ready (Bit 4)
The Transmit Ready bit is a read only bit that indicates if the HSS
Transmit FIFO is ready for the CPU to load new data for trans-
mission.
1: HSS transmit FIFO ready for loading
0: HSS transmit FIFO not ready for loading
Packet Mode Select (Bit 3)
The Packet Mode Select bit selects between Receive Packet
Ready and Receive Ready as the interrupt source for the RxIntr
interrupt.
1: Selects Receive Packet Ready as the source
0: Selects Receive Ready as the source
Receive Overflow Flag (Bit 2)
The Receive Overflow Flag bit indicates if the Receive FIFO
overflowed when set. This flag can be cleared by writing a ‘1’ to
this bit.
HSS Baud Rate Register [0xC072] [R/W]
Table 91. HSS Baud Rate Register
Register Description
The HSS Baud Rate register sets the HSS Baud Rate. At reset,
the default value is 0x0017 which sets the baud rate to 2.0 MHz.
Baud (Bits [12:0])
The Baud field is the baud rate divisor minus one, in units of 1/48
MHz. Therefore the Baud Rate = 48 MHz/(Baud + 1). This puts
a constraint on the Baud Value as follows:
(24 – 1) ≤ Baud ≥ (5000 – 1)
Document #: 38-08015 Rev. *J
Bit #
Field
Read/Write
Default
Bit #
Field
Read/Write
Default
R/W
15
0
7
0
-
Reserved
R/W
14
0
6
0
-
R/W
13
0
5
0
-
R/W
R/W
12
0
4
1
...Baud
1: Overflow occurred
0: Overflow did not occur
Receive Packet Ready Flag (Bit 1)
The Receive Packet Ready Flag bit is a read only bit that
indicates if the HSS receive FIFO is full with eight bytes or not.
1: HSS receive FIFO is full
0: HSS receive FIFO is not full
Receive Ready Flag (Bit 0)
The Receive Ready Flag is a read only bit that indicates if the
HSS receive FIFO is empty or not.
1: HSS receive FIFO is not empty (one or more bytes is reading
for reading)
0: HSS receive FIFO is empty
Reserved
Write all reserved bits with ’0’.
R/W
R/W
11
0
3
0
Baud...
R/W
R/W
10
0
2
1
R/W
R/W
9
0
1
1
CY7C67300
Page 57 of 99
R/W
R/W
8
0
0
1
[+] Feedback