CY7C68013-100AXC Cypress Semiconductor Corp, CY7C68013-100AXC Datasheet - Page 7

• Manufacturer Part Number: CY7C68013-100AXC
• Description: IC MCU USB PERIPH HI SPD 100LQFP
• Manufacturer: Cypress Semiconductor Corp
• Series: EZ-USB FX2LP™r

Specifications of CY7C68013-100AXC

• Applications: USB Microcontroller
• Core Processor: 8051
• Program Memory Type: ROMless
• Controller Series: CY7C680xx
• Ram Size: 16K x 8
• Interface: I²C, USB, USART
• Number Of I /o: 40
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.0
The “Reference Designs” section of the cypress website provides additional tools for typical USB 2.0 applications. Each reference
design comes complete with firmware source and object code, schematics, and documentation. Please visit
http://www.cypress.com for more information.
3.0
3.1
FX2 operates at two of the three rates defined in the Universal Serial Bus Specification Revision 2.0, dated April 27, 2000:
FX2 does not support the low-speed signaling mode of 1.5 Mbps.
3.2
The 8051 microprocessor embedded in the FX2 family has 256 bytes of register RAM, an expanded interrupt system, three
timer/counters, and two USARTs.
Document #: 38-08012 Rev. *C
• Supports bus powered applications by using renumeration
• 3.3V operation
• Smart Serial Interface Engine
• Vectored USB interrupts
• Separate data buffers for the SETUP and DATA portions of a CONTROL transfer
• Integrated I
• 48-MHz, 24-MHz, or 12-MHz 8051 operation
• Four integrated FIFOs
• Special autovectors for FIFO and GPIF interrupts
• Up to 40 general purpose I/Os
• Four package options—128-pin TQFP, 100-pin TQFP, 56-pin QFN and 56-pin SSOP.
• DSL modems
• ATA interface
• Memory card readers
• Legacy conversion devices
• Cameras
• Scanners
• Home PNA
• Wireless LAN
• MP3 players
• Networking.
• Full speed, with a signaling bit rate of 12 Mbps
• High speed, with a signaling bit rate of 480 Mbps
— Three counter/timers
— Expanded interrupt system
— Two data pointers
— Brings glue and FIFOs inside for lower system cost
— Automatic conversion to and from 16-bit buses
— Master or slave operation
— FIFOs can use externally supplied clock or asynchronous strobes
— Easy interface to ASIC and DSP ICs
USB Signaling Speed
8051 Microprocessor
Applications
Functional Overview
2
C-compatible controller, runs at 100 or 400 kHz
CY7C68013
Page 7 of 52