MIC3001GML Micrel Inc, MIC3001GML Datasheet - Page 49

• Manufacturer Part Number: MIC3001GML
• Description: IC FOM MANAGEMENT W/CALIBR 24MLF
• Manufacturer: Micrel Inc
• Type: Transceiverr

Specifications of MIC3001GML

• Protocol: SDHj Sonet
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 24-MLF®, QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Drivers/receivers: -
• Other names: 576-1753-5; MIC3001GML

Micrel, Inc.
ADC Result Registers
Notes:
1.
2.
August 2004
Default Value
Serial Address
Byte Address
Each LSB represents one degree centigrade. This register is to be used in conjunction with TEMPl to yield a sixteen-bit
temperature value. The value in this register is uncalibrated. The host should process the results using the scale factor and
offset provided. See the External Calibration section.
Default Value
Serial Address
Byte Address
This register is to be used in conjunction with TEMPh to yield a sixteen-bit temperature value. The value in this register is
uncalibrated. The host should process the results using the scale factor and offset provided. See the External Calibration
section. In the MIC3001 this register will always return zero. This register is provided for compliance with SFF-8472. It is not
used by the MIC3001 when doing threshold comparisons and setting alarm or warning bits.
Default Value
Serial Address
Byte Address
Each LSB represents 25.6mV. This register is to be used in conjunction with VINl to yield a sixteen-bit value. The values in
VINh:VlNl are in an unsigned binary format. The value in this register is uncalibrated. The host should process the results using
the scale factor and offset provided. See the External Calibration section.
Default Value
Serial Address
Byte Address
Each LSB represents 100µV. This register is to be used in conjunction with VINh to yield a sixteen-bit value. The values in
VINh:VINl are in an unsigned binary format. The value in this register is uncalibrated. The host should process the results using
the scale factor and offset provided. See the External Calibration section. In the MIC3001, this register will always return zero.
This register is provided for compliance with SFF-8472. It is not used by the MIC3001 when doing threshold comparisons and
setting alarm or warning bits.
read-only
read-only
read-only
read-only
TEMPh will contain measured temperature data after the completion of one conversion.
VINh will contain measured data after one A/D conversion cycle.
D[7]
D[7]
D[7]
D[7]
read-only
read-only
read-only
read-only
D[6]
D[6]
D[6]
D[6]
read-only
read-only
read-only
read-only
D[5]
D[5]
D[5]
D[5]
Temperature Result MSB (TEMPh)
Temperature Result LSB (TEMPl)
0000 0000 b = 00 h (0°C) (1)
A2 h = 1010001 b
96 = 60 h
0000 0000 b = 00 h (0°C)
A2 h = 1010001 b
97 = 61 h
0000 0000 b = 00 h (0V) (2)
A2 h = 1010001 b
98 = 62 h
0000 0000 b = 00 h (0V)
A2 h = 1010001 b
99 = 63 h
read-only
read-only
read-only
read-only
Voltage MSB (VINh)
Voltage LSB (VINl)
D[4]
D[4]
D[4]
D[4]
49
read-only
read-only
read-only
read-only
D[3]
D[3]
D[3]
D[3]
read-only
read-only
read-only
read-only
[e-mail]
D[2]
D[2]
D[2]
D[2]
read-only
read-only
read-only
read-only
D[1]
D[1]
D[1]
D[1]
or [phone]
M9999-082404-A
read-only
read-only
read-only
read-only
MIC3001
D[0]
D[0]
D[0]
D[0]