AW20-N02CE-CZ SMC Corporation, AW20-N02CE-CZ Datasheet - Page 4

• Manufacturer Part Number: AW20-N02CE-CZ
• Description: Regulator; 1/4NPT ports; float style auto drain (N.C.); bowl guard; gauge; PSI
• Manufacturer: SMC Corporation

Specifications of AW20-N02CE-CZ

• Drain Capacity: 8 cc
• Filtration Rating: 5 um
• Height: 160 mm
• Length, Overall: 3.5 mm
• Material, Bowl: Polycarbonate
• Pressure, Operating: 1 MPa (Max.)
• Proof Pressure: 1.5 MPa
• Size, Port: 1⁄4"
• Temperature, Ambient: -5 to +60 °C
• Thread Type: NPT
• Operating Pressure: 150 psi (Adjustment Range

Series
Series
Option / Part No.
Note 1) Assembly of a bracket and set nuts
Note 2) „ in part numbers for a round pressure gauge indicates a type of connection thread. No indication is necessary for R; however, indicate N for NPT. Please contact SMC
Note 3) Standard pressure gauge
Note 4) Including one O-ring and 2 mounting screws. [
Note 5) Lead wire with connector (2 m), adaptor, lock pin, O-ring (1 pc.) , mounting screw (2 pcs.) are attached. [
Note 6) Assembly of a bracket and 2 mounting screws
Note 7) Please consult with SMC regarding the set nuts for the AW60(K).
Note 8) Minimum operating pressure: N.O. type–0.1 MPa; N.C. type–0.1 MPa (AD27) and 0.15 MPa (AD37/47). Please contact SMC for PSI and F specifications.
1. Residual pressure disposal (outlet pressure removal) is not
1. Replace the element every 2 years or when the pressure drop
61
Option
Bracket assembly
Set nut
Pressure
gauge
Digital pressure
switch
Float type auto drain
Be sure to read this before handling. Refer to “Precautions for Handling Pneumatic Devices” (M-03-E3A) for Safety Instruc-
tions and F.R.L. Unit Precautions.
possible for the AW20 to AW60 even though the inlet pressure
is exhausted. When the residual pressure disposal is
performed, use the regulator with backflow mechanism (the
AW20K to AW60K).
becomes 0.1 MPa, whichever comes first, to prevent damage
to the element.
Warning
Warning
regarding the connection thread NPT and pressure gauge supply for PSI unit specifications.
switch, please refer to page 73. A pressure switch adaptor assembly (AW60P-310AS) will be additionally required for the AW60(K) only. Use the attached mounting screw (M3
x 0.5 x 14) for mounting. The mounting screw (M3 x 0.5 x 7) attached to the digital pressure switch assembly will not be required.
Round type
Square embedded
type
AW10
AW20K
Note 4)
Note 5)
Note 1)
Note 2)
Note 8)
Maintenance
NPN output / Wiring bottom entry
PNP output / Wiring bottom entry
0.02 to 0.2 MPa set
0.02 to 0.2 MPa set
Selection
NPN output / Wiring top entry
PNP output / Wiring top entry
Standard
Standard
to
N.O.
N.C.
to
AW60
Model
Specific Product Precautions
AW60K
]: Pressure gauge cover only
G27-10-R1
AR10P-270AS
AR10P-260S
G27-10-R1
AW10
AD17
—
—
—
—
Note 2)
AW20P-270AS
AR20P-260S
AW20(K)
AD27
—
G36-10-„01
G36-2-„01
1. Set the regulator while verifying the displayed values of the
2. The pressure gauge included with regulators for 0.02 to 0.2
3. Do not use tools on the pressure regulator knob as this may
1. Be sure to unlock the knob before adjusting the pressure and
2. A knob cover is available to prevent careless operation of the
GC3-10AS [ GC3P-010AS (Pressure gauge cover only)]
GC3-2AS [ GC3P-010AS (Pressure gauge cover only)]
• Pull the pressure regulator knob to
• Push the pressure regulator knob to
ISE35-N-25-MLA [ ISE35-N-25-M (Switch body only)]
ISE35-R-25-MLA [ ISE35-R-25-M (Switch body only)]
ISE35-N-65-MLA [ ISE35-N-65-M (Switch body only)]
ISE35-R-65-MLA [ ISE35-R-65-M (Switch body only)]
inlet and outlet pressure gauges. Turning the regulator knob
excessively can cause damage to the internal parts.
MPa setting is for up to 0.2 MPa use only (except for the
AR10). Exceeding 0.2 MPa of pressure can damage the gauge.
cause damage. It must be operated manually.
lock it after setting the pressure. Failure to follow this proce-
dure can cause damage to the knob and the outlet pressure
may fluctuate.
knob. Refer to “Features 1” for details.
unlock. (You can visually verify this
with the “orange mark” that appears in
the gap.)
lock. When the knob is not easily
locked, turn it left and right a little and
then push it (when the knob is locked,
the “orange mark”, i.e., the gap will
disappear).
AR30P-270AS
AR30P-260S
Warning
Caution
AW30(K)
AD38
AD37
]: Switch body only. Also, regarding how to order the digital pressure
Mounting and Adjustment
AW40(K)
AR40P-270AS
AR40P-260S
AW40(K)-06
G46-10-„02
G46-2-„02
AD48
AD47
AW60P-270AS
Orange mark
AW60(K)
—
Note 7)
Note 6)