PIC12F675-E/P Microchip Technology Inc., PIC12F675-E/P Datasheet - Page 49

• Manufacturer Part Number: PIC12F675-E/P
• Description: 8 PIN, 1.75 KB FLASH, 64 RAM, 6 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC12F675-E/P

• A/d Inputs: 4-Channel, 10-Bit
• Comparators: 1
• Cpu Speed: 5 MIPS
• Eeprom Memory: 128 Bytes
• Input Output: 5
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 8-pin PDIP
• Programmable Memory: 1.75K Bytes
• Ram Size: 64 Bytes
• Speed: 20 MHz
• Timers: 1-8-bit, 1-16-bit
• Voltage, Range: 2-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

8.0
The EEPROM data memory is readable and writable
during normal operation (full V
is not directly mapped in the register file space.
Instead, it is indirectly addressed through the Special
Function Registers. There are four SFRs used to read
and write this memory:
• EECON1
• EECON2 (not a physically implemented register)
• EEDATA
• EEADR
EEDATA holds the 8-bit data for read/write, and
EEADR holds the address of the EEPROM location
being accessed. PIC12F629/675 devices have 128
bytes of data EEPROM with an address range from 0h
to 7Fh.
REGISTER 8-1:
REGISTER 8-2:
 2003 Microchip Technology Inc.
DATA EEPROM MEMORY
bit 7-0
bit 7
bit 6-0
EEDAT — EEPROM DATA REGISTER (ADDRESS: 9Ah)
EEADR — EEPROM ADDRESS REGISTER (ADDRESS: 9Bh)
bit 7
EEDATn: Byte value to write to or read from Data EEPROM
bit 7
Unimplemented: Should be set to '0'
EEADR: Specifies one of 128 locations for EEPROM Read/Write Operation
Legend:
R = Readable bit
- n = Value at POR
Legend:
R = Readable bit
- n = Value at POR
EEDAT7
R/W-0
U-0
—
DD
range). This memory
EEDAT6
EADR6
R/W-0
R/W-0
EEDAT5
EADR5
R/W-0
R/W-0
W = Writable bit
’1’ = Bit is set
W = Writable bit
’1’ = Bit is set
EEDAT4
EADR4
R/W-0
R/W-0
The EEPROM data memory allows byte read and write.
A byte write automatically erases the location and
writes the new data (erase before write). The EEPROM
data memory is rated for high erase/write cycles. The
write time is controlled by an on-chip timer. The write
time will vary with voltage and temperature as well as
from chip to chip. Please refer to AC Specifications for
exact limits.
When the data memory is code protected, the CPU
may continue to read and write the data EEPROM
memory. The device programmer can no longer access
this memory.
Additional information on the Data EEPROM is
available in the PICmicro™ Mid-Range Reference
Manual, (DS33023).
EEDAT3
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared
EADR3
R/W-0
R/W-0
PIC12F629/675
EEDAT2 EEDAT1
EADR2
R/W-0
R/W-0
x = Bit is unknown
x = Bit is unknown
EADR1
R/W-0
R/W-0
DS41190C-page 47
EEDAT0
EADR0
R/W-0
R/W-0
bit 0
bit 0