ZS-28-C SMC Corporation, ZS-28-C Datasheet - Page 3

• Manufacturer Part Number: ZS-28-C
• Description: 24-26GA Red 3M
• Manufacturer: SMC Corporation

Note 1) Auto shift function is not available when analog output option is selected.
Note 2) The following units can be selected with unit conversion function:
Note 4) Series PSE530 pressure sensors are also applicable.
Specifications
Series
7
Applicable pressure sensor
Regulating pressure range
Regulating pressure resolution
Rated pressure range
Power supply voltage
Current consumption
Sensor input
Hysteresis
Switch output
Response time
Repeatability
Display accuracy
(ambient temperature of 25°C)
Display
Indication light
Auto shift input
Temperature characteristics
Connection
Material
With power supply/output connection cable
Without power supply/output connection cable
No. of inputs
Input protection
Maximum load current
Maximum load voltage
Residual voltage
Output protection
Anti-chattering function
Voltage output
Current output
Enclosure
Operating temperature range
Operating humidity range
Withstand voltage
Insulation resistance
Vibration resistance
Impact resistance
Accuracy (to display value) (25°C)
Accuracy (to display value) (25°C)
Also, analog output option is not available when auto shift function is selected.
For vacuum & compound pressure:
For positive pressure & low pressure: MPa·kPa·kgf/cm
For low differential pressure:
Contact SMC for more information.
PSE300
Model
Note 1)
Note 1)
Note 1)
For compound pressure
–101 to 101 kPa
±2 digits or less
–101 to 101 kPa
10 to 150 Hz at whichever is smaller of 1.5 mm amplitude or 98 m/s
±0.5%F.S.
PSE533
PSE543
PSE563
0.2 kPa
kPa·kgf/cm
kPa·mmH
Maximum load impedance: 300 Ω (at 12 VDC), 600 Ω (at 24 VDC), Minimum load impedance: 50 Ω
3 + 1/2-digit, 7-segment indicator, 2-color display (Red/Green), Sampling frequency: 5 times/sec
Non-voltage input (reed or solid state), Low level input: 5 ms or more, Low level: 0.4 V or less
Note 4)
Output voltage: 1 to 5 V (within rated pressure range), Output impedance: Approx. 1 kΩ
Linearity: ±0.2%F.S. (not including sensor accuracy), Response speed: 150 ms or less
Response time settings for anti-chattering function: 20 ms, 160 ms, 640 ms, 1280 ms
Linearity: ±0.2%F.S. (not including sensor accuracy), Response time: 150 ms or less
2
12 to 24 VDC ±10%, Ripple (p-p) 10% or less (with power supply polarity protection)
Power supply/Output connection: 5 P connector, Sensor connection: 4 P connector
O
2
Operating: 0 to 50°C, Stored: –10 to 60°C (with no condensation and no freezing)
·bar·psi·mmHg·inHg
10 to –101 kPa
10 to –101 kPa
For vacuum
2
PSE531
PSE541
PSE561
OUT1: Lights up when ON (Green), OUT2: Lights up when ON (Red)
·bar·psi
0.1 kPa
50 mA or less (Current consumption for sensor is not included.)
Hysterisis mode: Variable, Window comparator mode: Variable
100 m/s
Output current: 4 to 20 mA (within rated pressure range)
±0.6%F.S. or less
±1.0%F.S. or less
Operating/Stored: 35 to 85%RH (with no condensation)
1000 VAC for 1 minute between live parts and case
Note 4)
50 MΩ between live parts and case (at 500 VDC)
NPN or PNP open collector output: Two outputs
With excess voltage protection (up to 26.4 V)
2
1 V or less (with load current of 80 mA)
in X, Y, Z directions, 3 times each (de-energized)
For low pressure
1 to 5 VDC (Input impedance: 1 MΩ)
–10 to 100 kPa
–10 to 100 kPa
±0.5%F.S. or less (based on 25°C)
Front case: PBT, Rear case: PBT
PSE532
0.1 kPa
With short circuit protection
30 VDC (at NPN output)
±0.1%F.S. or less
1 ms or less
Note 4)
PSE30
1 input
80 mA
±0.5%F.S. ±1 digit or less
IP40
85 g
30 g
2
acceleration, in X, Y, Z directions, for 2 hours each (de-energized)
–50 to 500 kPa
–0.1 to 1 MPa
Conforms to CE marking and UL (CSA) standards.
PSE564
1 kPa
For positive pressure
±1.0%F.S. or less ±1.5%F.S. or less
±1.5%F.S. or less ±2.0%F.S. or less
–50 to 500 kPa
–0.1 to 1 MPa
0.001 MPa
PSE530
PSE560
Note 4)
For differential pressure
–0.2 to 2.00 kPa
–0.2 to 2.00 kPa
0.01 kPa
–