SI5100-H-GL Silicon Laboratories Inc, SI5100-H-GL Datasheet - Page 15

• Manufacturer Part Number: SI5100-H-GL
• Description: IC TXRX SONET/SDH LP HS 195PBGA
• Manufacturer: Silicon Laboratories Inc
• Series: SiPHY®r
• Type: Transceiverr

Specifications of SI5100-H-GL

• Package / Case: 196-BGA
• Number Of Drivers/receivers: 1/1
• Protocol: SONET/SDH
• Voltage - Supply: 1.71 V ~ 1.89 V
• Mounting Type: Surface Mount
• Product: PHY
• Supply Voltage (max): 1.89 V, 3.47 V
• Supply Voltage (min): 1.71 V
• Supply Current: 0.83 A
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 20 C
• Mounting Style: SMD/SMT
• Maximum Power Dissipation: 1600 mW
• Number Of Channels: 1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.2.3. Slice Level Adjustment
The limiting amplifier allows adjustment of the 0/1
decision threshold, or slice level, to allow optimization of
bit-error-rates (BER) for demanding applications, such
as long-haul links. The Si5100 provides two different
modes of slice level adjustment: Absolute slice mode
and proportional slice mode. The mode is selected
using the SLICEMODE input.
In either mode, the slice level is set by applying a dc
voltage to the SLICELVL input. The mapping of the
voltage on the SLICELVL pin to the 0/1 decision
threshold voltage (or slice voltage) depends on the
selected mode of operation.
The SLICELVL mapping for absolute slice mode
(SLICEMODE = 0) is given in Figure 6. The linear
region of this curve can be approximated by the
following equation:
where V
RXDIN input, V
SLICELVL pin, and VREF is the reference voltage
provided by the Si5100 on the VREF output pin
(nominally 1.25 V).
The SLICELVL mapping for proportional slice mode
(SLICEMODE = 1) is given in Figure 7 on page 18. The
linear region of this curve can be approximated by the
following equation:
where V
RXDIN input; V
SLICELVL pin; VREF is the reference voltage provided
by the Si5100 on the VREF output pin, and V
is the peak-to-peak voltage level of the receive data
signal applied to the RXDIN input.
The slice level adjustment function can be disabled by
tieing the SLICELVL input the VREF. When slice level
adjustment is disabled, the effective slice level is set to
0 mV relative to internally biased input common mode
voltage for RXDIN.
5.3. Clock and Data Recovery (CDR)
The Si5100 uses an integrated CDR to recover clock
and data from a non-return to zero (NRZ) signal input on
RXDIN. The recovered clock is used to regenerate the
incoming data by sampling the output of the limiting
amplifier at the center of the NRZ bit period.
V
LEVEL
LEVEL
LEVEL
V
(
≈
V
LEVEL
(
RXDIN PP
(
V
SLICELVL
is the effective slice level referred to the
is the effective slice level referred to the
SLICELVL
SLICELVL
≈
(
[
(
V
)
×
SLICELVL
Equation 6
Equation 7
0.95
–
(
is the voltage applied to the
is the voltage applied to the
VREF 0.4
)
]
–
–
[
0.03
(
×
VREF 0.4
×
)
)
V
×
×
RXDIN PP
0.375
)
)
(
) 0.005
×
RXDIN(PP)
–
)
]
Rev. 1.4
5.3.1. Sample Phase Adjustment
In
introduced by the transmission medium, it may be
desirable to recover data by sampling at a point that is
not at the center of the data eye. The Si5100 provides a
sample phase adjustment capability that allows
adjustment of the CDR sampling phase across the NRZ
data period. When sample phase adjustment is
enabled, the sampling instant used for data recovery
can be moved over a range of approximately ±22 ps
relative to the center of the incoming NRZ bit period.
The sample phase is set by applying a dc voltage to the
PHASEADJ input. The mapping of the voltage present
on the PHASEADJ input to the sample phase sampling
offset is given in Figure 8 on page 18. The linear region
of this curve can be approximated by the following
equation:
where Phase Offset is the sampling offset in
picoseconds from the center of the data eye; V
is the voltage applied to the PHASEADJ pin, and VREF
is the reference voltage provided by the Si5100 on the
VREF output pin (nominally 1.25 V). A positive phase
offset adjusts the sampling point to lead the default
sampling point (the aligned center of the data eye) and
a negative phase offset adjusts the sampling point to lag
the default sampling point.
Data recovery using a sampling phase offset is disabled
by tieing the PHASEADJ input to VREF. This forces a
phase offset of 0 ps to be used for data recovery.
5.3.2. Receiver Lock Detect
The Si5100 provides lock-detect circuitry that indicates
whether the PLL has achieved frequency lock with the
incoming data. This circuit compares the frequency of a
divided down version of the recovered clock with the
frequency of the supplied reference clock. The Si5100
uses either REFCLK or TXCLK16IN as the reference
clock input signal depending on the state of the
REFSEL input. If the (divided) recovered clock
frequency deviates from that of the reference clock by
more than the amount specified in Table 5 on page 10,
the CDR is declared out of lock, and the loss-of-lock
(RXLOL) pin is asserted. In this state, the CDR attempts
to reacquire lock with the incoming data stream. During
reacquisition, the recovered clock frequency (RXCLK1
and RXCLK2) drifts over a range of approximately
±1000 ppm relative to the supplied reference clock
unless LTR is asserted. The RXLOL output remains
asserted until the frequency of the (divided) recovered
clock differs from the reference clock frequency by less
Phase Offset 85 ps/V
applications where data eye
≈
Equation 8
×
(
V
PHASEADJ
–
(
distortions are
0.4 VREF
Si5100
×
PHASEADJ
)
)
15