AT42QT1111-MU Atmel, AT42QT1111-MU Datasheet - Page 12

• Manufacturer Part Number: AT42QT1111-MU
• Description: IC TOUCH SENSOR 11KEY QFN
• Manufacturer: Atmel
• Series: QTouch™r
• Type: Capacitiver

Specifications of AT42QT1111-MU

• Touch Panel Interface: 10, 2-Wire
• Number Of Inputs/keys: 11 Key
• Data Interface: Serial, SPI™
• Voltage Reference: Internal
• Voltage - Supply: 3 V ~ 5.5 V
• Current - Supply: 12mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 32-VFQFN Exposed Pad
• Output Type: Logic
• Interface: SPI
• Input Type: Logic
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: AT42QT1111-MU; AT42QT1111-MUTR

4.1.5
12
AT42QT1111-MU/AT42QT1111-AU
Report Requests
Figure 4-2.
When the “Send Setups” command is received, the QT1111 stops measurement of QTouch
sensors and waits for 42 bytes of data to be sent. Only when all 42 bytes have been received
(and the CRC byte, if CRC is enabled), the QT1111 applies all the settings to RAM and resumes
measurement. In this case, if CRC is enabled, the CRC byte is calculated for all the data sent by
the host, including the command byte 0x01.
Control Commands are specified in detail in
Report Requests are sent by the Host to instruct the QT1111 to return status information. The
host sends the appropiate “Report Request” command, then transmits Null bytes on MOSI while
the QT1111 returns the report data on MISO.
Figure 4-3.
Host (Sends on MOSI)
Host (Sends on MOSI)
Sleep Command – CRC Enabled
All Keys Report – CRC Disabled
Response: 0x3F (Expected Command CRC)
Response: 0x55 ( Idle”
Response: 0x55 ( Idle”
Key Status Report Byte 0
Key Status Report Byte 1
Command CRC: 0x3F
Command: 0x05
Command: 0xC1
Null: 0x00
Null: 0x00
“
“
Section 5 on page
–
–
Fresh Command)
Fresh Command)
Device (Responds on MISO)
Device (Responds on MISO)
22.
Simultaneous
Transmission
Simultaneous
Transmission
9571A–AT42–02/10