GD82562EX Intel, GD82562EX Datasheet

Page 1

Family ("E" & "G" series) 10/100 Mbps Platform LAN Connect (PLC) Devices Stepping Information May 2007 Revision 2.6 Notice: The 82562xx PLC may contain design defects or errors known as errata that may cause the product to deviate from ...

Page 2

... Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right ...

Page 3

... Family of PLC devices (for example, 82562EM &82562G). Added errata number six, “Packets with Valid CRC Checksums and Invalid Length Fields Discarded.“ Changed document status from Intel Confidential to no status. Added the 82562EP product codes. Included “G” series information. 1 ...

Page 4

Product Code The product ordering code for the 82562ET is: DA82562ET. The product ordering code for the 82562EM is: DA82562EM. The product ordering code for the 82562EX is: DA82562EX. The product ordering code for the 82562EZ is: DA82562EZ. The product ...

Page 5

Device Stepping 82562EX A-2 82562EX A-2 82562EX A-2 82562EZ Device Stepping 82562EZ A-2 82562EZ A-2 82562EZ A-2 82562EP Device Stepping 82562EP B-1 82562EP B-1 82562G Device Stepping 82562G A-0 82562GT Device Stepping 82562GT A-0 82562GX Device Stepping 82562GX A-0 ...

Page 6

... Summary Table of Changes The following table indicates the Specification Changes, Errata, Specification Clarifications or Documentation Changes, which apply to the listed 82562xx steppings. Intel intends to fix some of the errata in future steppings of the component and to account for other outstanding issues through documentation or Specification Changes as noted. This table uses the following notations: ...

Page 7

X X No. A-1 A-2 No. A-1 A-2 82562 Family (“E” & “G”) Stepping Information Packets with Valid CRC Checksums and Invalid Length Fields X NoFix Discarded B-1 Plans SPECIFICATION CLARIFICATIONS B-1 Plans DOCUMENTATION CHANGES 8 Page Page 5 ...

Page 8

Specification Changes Specification Changes 1. Exclude Pin X1 from the Exclusive OR (XOR) Tree Chain The X1 pin of the 82562xx should not be included in the eXclusive OR (XOR) tree. Explanation: The inclusion of the X1 pin introduces noise ...

Page 9

Errata 1. Auto-Negotiation Fails to Link During the auto-negotiation process, the 82562xx may fail to establish link. This is due to a Problem: hardware race condition that only exists during the process. This has been observed with hubs and switches ...

Page 10

Errata Power consumption will be slightly higher than expected with the link disconnected. Implication: The MDI/MDI-X feature should be disabled if the reduced power down functionality is needed. Workaround: Reduced Power Down is enabled by setting the Reduced Power Down ...

Page 11

Note: This page intentionally left blank. 82562 Family (“E” & “G”) Stepping Information Errata 9 ...

Page 12

Errata 10 82562 Family (“E” & “G”) Stepping Information ...