IC-202 Konica, IC-202 Datasheet - Page 87

• Manufacturer Part Number: IC-202
• Description: Quick Guide
• Manufacturer: Konica

www.datasheet4u.com
3
3-18
7
8
9
In Administrator mode of PageScope Web Connection, select [Net-
Ware Setting] from the Network tab, and then specify the following set-
tings.
IPX Setting: Select [ON].
Ethernet Frame Type: Select [Auto Detect]. (Select the frame type ac-
cording to the network environment.)
NetWare Print Mode: Select [Nprinter/Rprinter].
Print Server Name: Specify the print server name created in step 4.
Printer Number: Specify the printer number (0-255). When 255 is spec-
ified, the setting is [Auto].
Restart this machine (turn it off, then on again).
–
Use the NetWare server console to display the print server screen, and
then check that the created printer is shown as “Waiting for Job” for
the connected printer (0).
When turning the power off, then on again, be sure to turn the sub-
power switch off first, then the main power switch. In addition, wait
at least 10 seconds before turning the power on again; otherwise,
this machine may not function properly.
Setting Up Network Printing
IC-202