IRM-H140/TR2 Everlight, IRM-H140/TR2 Datasheet - Page 10

• Manufacturer Part Number: IRM-H140/TR2
• Description: (IRM-H1xx/TR2) Infrared Remote-control Receiver Module
• Manufacturer: Everlight

Soldering Iron
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
Repairing
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
ESD Precaution
the devices especially when they are removed from the Anti-static bag. Electro-Static Sensitive
Devices warning labels are on the packing.
Everlight Electronics Co., Ltd.
Device No
Proper storage and handing procedures should be followed to prevent ESD damage to
Repair should not be done after the LEDs have been soldered. When repairing is
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3
：
D MO-138-376
EVERLIGHT ELECTRONICS CO.,LTD.
Prepared date
http:\\www.everlight.com
：
7 -11-2007
www.DataSheet.co.kr
IRM-H1xx/TR2 SERIES
Rev 2
Prepared by
：
Page: 10 of 12
C indy Lin
Datasheet pdf - http://www.DataSheet4U.net/