rfp-100-5ae-s Anaren Microwave, rfp-100-5ae-s Datasheet - Page 2

• Manufacturer Part Number: rfp-100-5ae-s
• Description: Attenuator Full Flange 100 Watts
• Manufacturer: Anaren Microwave

Model 100-XXAE-S
Typical Performance:
Power De-rating:
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]
Reel For Pick and Place
Available on Tape and
Manufacturing.
Mounting Footprint and Procedure:
(2 PLACES)
.025 MIN.
BOARD LOWER
THAN LEAD.
SUGGESTED STRESS RELIEF METHODS
1.
2.
3.
4.
5.
MAKE SURE THAT THE DEVICES ARE MOUNTED ON
FLAT SURFACES (.001" UNDER THE DEVICE) TO
OPTIMIZE THE HEAT TRANSFER.
DRILL & TAP THE HEATSINK FOR THE APPROPRIATE
THREAD SIZE TO BE USED.
COAT HEATSINK WITH A MINIMUM AMOUNT OF HIGH
QUALITY SILICONE GREASE (.001" MAX. THICKNESS).
POSITION DEVICE ON MOUNTING SURFACE & SECURE
USING SOCKET HEAD SCREWS, FLAT & SPLIT WASHER.
TORQUE SCREWS TO THE APPROPRIATE VALUE. MAKE
SURE THAT THE DEVICE IS FLAT AGAINST THE HEATSINK.
(CARE SHOULD BE TAKEN TO AVOID UPWARD PRESSURE OF
THE LEADS TOWARDS THE LID).
SOLDER LEADS IN PLACE USING APPROPROATE SOLDER WITH
A CONTROLLED TEMPERATURE IRON.
SCALE: NONE
SUGGESTED MOUNTING PROCEDURES:
** FOR MORE DETAILS CONTACT FACTORY **
BOARD EVEN
WITH LEAD.
100-XXAE-S
BOARD LOWER
THAN LEAD.
NOT RECOMMENDED APPLICATION
SCALE: NONE
(097) Rev C
BOARD HIGHER
THAN LEAD.