rfp-20n50tpr Anaren Microwave, rfp-20n50tpr Datasheet - Page 2

• Manufacturer Part Number: rfp-20n50tpr
• Description: Aluminum Nitride Terminations 20 Watts, 50 Model Rfp-20n50tpr
• Manufacturer: Anaren Microwave

2
Typical Performance
Power Derating
Model RFP-20N50TPR
100
75
50
25
0
25
50
CASE TEMPERATURE — °C
75
Sales Desk Europe: Voice: ([phone] Fax: [phone]
100
Sales Desk USA: Voice: [phone] Fax: [phone]
125
150
Suggested Mounting Procedures
1. Make sure that the devices are mounted on flat surfaces
2. Drill & tap the heatsink for the appropriate thread size to be
3. Coat heatsink with a minimum amount of high quality
4. Position device on mounting surface & secure using socket
5. Solder leads in place using an SN63 type solder with a
(2 PLACES)
(.001" under the device) to optimize the heat transfer.
used.
silicone grease (.001" max. thickness).
head screws, flat & split washers. Torque screws to the
appropriate value. Make sure that the device is flat against
the heatsink. (Care should be taken to avoid upward
pressure of the leads towards the lid).
controlled temperature iron (700°F).
.025
BOARD LOWER
THAN LEAD.
MIN.
SUGGESTED STRESS RELIEF METHODS
SCALE:
BOARD EVEN
WITH LEAD.
BOARD LOWER
THAN LEAD.
NOT RECOMMENDED APPLICATION
SCALE:
BOARD HIGHER
THAN LEAD.