lmc6064ep National Semiconductor Corporation, lmc6064ep Datasheet - Page 5

• Manufacturer Part Number: lmc6064ep
• Description: Precision Cmos Quad Micropower Operational Amplifier
• Manufacturer: National Semiconductor Corporation

Note 5: Applies to both single-supply and split-supply operation. Continous short circuit operation at elevated ambient temperature can result in exceeding the
maximum allowed junction temperature of 150°C. Output currents in excess of ±30 mA over long term may adversely affect reliability.
Note 6: The maximum power dissipation is a function of T
(Max)
Note 7: Human body model, 1.5 kΩ in series with 100 pF.
Note 8: Typical values represent the most likely parametric norm.
Note 9: All limits are guaranteed by testing or statistical analysis.
Note 10: V
Note 11: V
Note 12: Input referred V
Note 13: For operating at elevated temperatures the device must be derated based on the thermal resistance θ
Note 14: Do not connect output to V
Note 15: All numbers apply for packages soldered directly into a PC board.
Note 16: "Testing and other quality control techniques are used to the extent deemed necessary to ensure product performance over the specified temperature
range. Product may not necessarily be tested across the full temperature range and all parameters may not necessarily be tested. In the absence of specific
PARAMETRIC testing, product performance is assured by characterization and/or design."
− T
A
)/θ
+
+
JA
= 15V, V
= 15V. Connected as Voltage Follower with 10V step input. Number specified is the slower of the positive and negative slew rates.
.
CM
= 7.5V and R
+
= 15V and R
+
, when V
L
connected to 7.5V. For Sourcing tests, 7.5V
L
= 100 kΩ connected to 7.5V. Each amp excited in turn with 100 Hz to produce V
201144 Version 2 Revision 3
+
is greater than 13V or reliability witll be adversely affected.
J(Max)
, θ
JA
, and T
A
. The maximum allowable power dissipation at any ambient temperature is P
Print Date/Time: 2011/08/30 23:14:26
5
≤
V
O
≤
11.5V. For Sinking tests, 2.5V
JA
with P
D
O
= (T
≤
= 12 V
V
J
–T
O
≤
A
PP
)/θ
7.5V.
.
JA
.
www.national.com
D
= (T
J