24lc1026t Microchip Technology Inc., 24lc1026t Datasheet

no-image

24lc1026t

Manufacturer Part Number
24lc1026t
Description
Manufacturer
Microchip Technology Inc.
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
24lc1026t-E/SM
Manufacturer:
MICROCHIP
Quantity:
12 000
Part Number:
24lc1026t-E/SN
Manufacturer:
MICROCHIP
Quantity:
12 000
Part Number:
24lc1026t-E/ST
Manufacturer:
MICROCHIP
Quantity:
12 000
Part Number:
24lc1026t-I/SM
Manufacturer:
MICROCHIP
Quantity:
12 000
Part Number:
24lc1026t-I/SN
Manufacturer:
MICROCHIP
Quantity:
12 000
Device Selection Table:
Features:
• Low-Power CMOS Technology:
• 2-Wire Serial Interface, I
• Cascadable up to Four Devices
• Schmitt Trigger Inputs for Noise Suppression
• Output Slope Control to Eliminate Ground Bounce
• 100 kHz and 400 kHz Clock Compatibility
• 1 MHz Clock for FC Versions
• Page Write Time 3 ms, typical
• Self-Timed Erase/Write Cycle
• 128-Byte Page Write Buffer
• Hardware Write-Protect
• ESD Protection >400V
• More than 1 Million Erase/Write Cycles
• Data Retention >200 Years
• Factory Programming Available
• Packages include 8-lead PDIP, SOIJ and SOIC
• Pb-Free and RoHS Compliant
• Temperature Ranges:
Description:
The Microchip Technology Inc. 24AA1026/24LC1026/
24FC1026 (24XX1026*) is a 128K x 8 (1024K bit)
Serial Electrically Erasable PROM, capable of
operation across a broad voltage range (1.7V to 5.5V).
It has been developed for advanced, low-power
applications such as personal communications or data
acquisition. This device has both byte write and page
write capability of up to 128 bytes of data.
 2011 Microchip Technology Inc.
*100 kHz for V
24AA1026
24LC1026
24FC1026
100 kHz for V
400 kHz for V
- Read current 450 A, maximum
- Standby current 5 A, maximum
- Industrial (I):
- Automotive (E): -40C to +125C
Number
Part
CC
CC
CC
1.7-5.5V
2.5-5.5V
1.8-5.5V
Range
V
<4.5V, E-temp
< 2.5V
< 2.5V
CC
-40C to +85C
1024K I
2
C™ Compatible
Max. Clock
Frequency
400 kHz
400 kHz*
1 MHz
24AA1026/24LC1026/24FC1026
2
C
Ranges
Temp.
I, E
CMOS Serial EEPROM
I
I
This device is capable of both random and sequential
reads. Reads may be sequential within address
boundaries 0000h to FFFFh and 10000h to 1FFFFh.
Functional address lines allow up to four devices on the
same data bus. This allows for up to 4 Mbits total
system EEPROM memory. This device is available in
the standard 8-pin PDIP, SOIC and SOIJ packages.
Package Type
Block Diagram
*24XX1026 is used in this document as a generic part number
for the 24AA1026/24LC1026/24FC1026 devices.
SOIJ/SOIC
I/O
PDIP
SDA
Control
Logic
V
V
I/O
CC
SS
SCL
V
NC
A1
A2
V
SS
NC
A1
A2
SS
A1 A2
Memory
Control
1
2
3
4
Logic
1
2
3
4
WP
XDEC
8
7
6
5
8
7
6
5
V
WP
SCL
SDA
DS22270B-page 1
V
WP
SCL
SDA
CC
CC
HV Generator
Page Latches
R/W Control
Sense AMP
EEPROM
YDEC
Array

Related parts for 24lc1026t

24lc1026t Summary of contents

Page 1

... It has been developed for advanced, low-power applications such as personal communications or data acquisition. This device has both byte write and page write capability 128 bytes of data.  2011 Microchip Technology Inc. 2 ™ C CMOS Serial EEPROM This device is capable of both random and sequential reads ...

Page 2

... A1, A2 -40°C to +85°C A +1. -40°C to +85° -40°C to +125°C A Conditions 2.5V < 2.5V  2.5V (Note 5.0V (Note MHz CLK = 5.5V, SCL = 400 kHz = 5.  2011 Microchip Technology Inc. ...

Page 3

... This eliminates the need for a TI specification for standard operation. 4: This parameter is not tested but established by characterization. For endurance estimates in a specific application, please consult the Total Endurance™ Model which can be obtained from Microchip’s web site at www.microchip.com.  2011 Microchip Technology Inc. Industrial (I ...

Page 4

... V  5.5V CC 1.8V  V  2.5V (24FC1026 only) CC 2.5V  V  5.5V (24FC1026 only) CC 1.7V  V  2.5V CC 2.5V  V  4.5V, E-temp CC 2.5V  V  5.5V CC 1.8V  V  2.5V (24FC1026 only) CC 2.5V  V  5.5V (24FC1026 only) CC All except 24FC1026 (Note 1 and Note 3) — = 5.5V (Note  2011 Microchip Technology Inc. ...

Page 5

... This input is used to synchronize the data transfer from and to the device. 2.4 Write-Protect (WP) This pin must be connected to either write operations are enabled. If tied write operations are inhibited, but read operations are not affected.  2011 Microchip Technology Inc. Table 2- tied DS22270B-page 5 ...

Page 6

... Serial Clock (SCL), controls the bus access, and generates the Start and Stop conditions while the 24XX1026 works as a slave. Both master and slave can operate as a transmitter or receiver, but the master device determines which mode is activated. DS22270B-page 6  2011 Microchip Technology Inc. ...

Page 7

... The transmitter must release the SDA line at this point allowing the receiver to pull the SDA line low to acknowledge the previous eight bits of data.  2011 Microchip Technology Inc. The data on the line must be changed during the low period of the clock signal. There is one bit of data per clock pulse ...

Page 8

... CONTROL BYTE FORMAT Read/Write Bit Chip Block Select Select Bits Bit R/W ACK Slave Address Acknowledge Bit Address Low Byte A A • • • • • •  2011 Microchip Technology Inc. ...

Page 9

... This will force the entire page to endure a write cycle, for this reason endurance is specified per page.  2011 Microchip Technology Inc. 6.2 Page Write The write control byte, word address and the first data byte are transmitted to the 24XX1026 in the same way byte write ...

Page 10

... C K DS22270B-page 10 Address Address High Byte Low Byte Address Address High Byte Low Byte Data Byte Data Data Byte 127  2011 Microchip Technology Inc. ...

Page 11

... Note: Care must be taken when polling the 24XX1026. The control byte that was used to initiate the write needs to match the control byte used for polling.  2011 Microchip Technology Inc. FIGURE 7-1: Write Command Send Stop Condition to Initiate Write Cycle ...

Page 12

... The internal address counter will automatically roll over from address 1FFFFh to address 10000h if the master acknowledges the byte received from the array address, 1FFFFh. 8-2). After a random Read internal Address Pointer will  2011 Microchip Technology Inc. ...

Page 13

... A C BUS ACTIVITY K FIGURE 8-3: SEQUENTIAL READ Control BUS ACTIVITY Byte Data n MASTER SDA LINE BUS ACTIVITY  2011 Microchip Technology Inc Address Address A High Byte Low Byte Data Data ...

Page 14

... For marking beyond this, certain price adders apply. Please check with your Microchip Sales Office. DS22270B-page 14 Example: 24LC1026 e 3 I/P 13F 1028 Example : 24L1026I 1028 13F Example : 24LC1026 e 3 I/SM 1028 13F  2011 Microchip Technology Inc. ...

Page 15

... PLO %RG\ >3',3@ 1RWH N NOTE 1RWHV  2011 Microchip Technology Inc DS22270B-page 15 ...

Page 16

... Note: DS22270B-page 16  2011 Microchip Technology Inc. ...

Page 17

... Note:  2011 Microchip Technology Inc. DS22270B-page 17 ...

Page 18

... PP %RG\ >62,&@ 1RWH DS22270B-page 18  2011 Microchip Technology Inc. ...

Page 19

... Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging  2011 Microchip Technology Inc. DS22270B-page 19 ...

Page 20

... Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging DS22270B-page 20  2011 Microchip Technology Inc. ...

Page 21

... Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging  2011 Microchip Technology Inc. DS22270B-page 21 ...

Page 22

... APPENDIX A: REVISION HISTORY Revision A Original release (01/2011) Revision B (5/2011) Added Automotive Temp. DS22270B-page 22  2011 Microchip Technology Inc. ...

Page 23

... To register, access the Microchip web site at www.microchip.com. Under “Support”, “Customer Change Notification” and follow the registration instructions.  2011 Microchip Technology Inc. CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels: • Distributor or Representative • Local Sales Office ...

Page 24

... What deletions from the document could be made without affecting the overall usefulness there any incorrect or misleading information (what and where)? 7. How would you improve this document? DS22270B-page 24 FAX: (______) _________ - _________ N Total Pages Sent ________ Literature Number: DS22270B  2011 Microchip Technology Inc. ...

Page 25

... Tape and Reel, Indus- trial Temperature, 1.7V, SOIJ package. b) 24LC1026-I/P: Industrial Temperature, 2.5V, PDIP package CMOS Serial EEPROM c) 24LC1026T-I/SM: Tape and Reel, Indus CMOS Serial EEPROM trial Temperature, 2.5V, SOIJ package. d) 24FC1026-I/SN: Tape and Reel, Indus CMOS Serial EEPROM trial Temperature, 1.8V, SOIC package. ...

Page 26

... NOTES: DS22270B-page 26  2011 Microchip Technology Inc. ...

Page 27

... Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.  2011 Microchip Technology Inc. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, K ...

Page 28

... Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-6578-300 Fax: 886-3-6578-370 Taiwan - Kaohsiung Tel: 886-7-213-7830 Fax: 886-7-330-9305 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350  2011 Microchip Technology Inc. 05/02/11 ...

Related keywords