njg1649hb6 New Japan Radio Co.,Ltd, njg1649hb6 Datasheet - Page 3

• Manufacturer Part Number: njg1649hb6
• Description: Njg1649hb6 Spdt Switch Gaas Mmic
• Manufacturer: New Japan Radio Co.,Ltd

TERMINAL INFORMATION
No.
1
2
3
4
5
6
7
8
SYMBOL
VCTL
GND
GND
GND
VDD
PC
P1
P2
RF port. This port is connected to PC port by control voltage of
+1.3~4.5V(V
circuit, an external capacitor is required.
Ground terminal. Please connect this terminal with ground plane as
close as possible for good RF performance.
RF port. This port is connected to PC port by control voltage of
+0.0~0.4V(V
circuit, an external capacitor is required.
Ground terminal. Please connect this terminal with ground plane as
close as possible for good RF performance.
Control port. This terminal is set to +1.3V~4.5V of logical high level for
ON state between PC and P1 RF ports, and set to +0.0~0.4V of logical
low level for ON state between PC and P2 RF ports.
Common RF port. This PC port is connected to P1 or P2 by logical
control voltage of VCTL.
In order to block DC bias voltage of internal circuit, an external capacitor
is required.
A supply voltage terminal (+2.5~+4.5V). Please place a bypass
capacitor between this and GND for avoiding RF noise from outside.
Ground terminal. Please connect this terminal with ground plane as
close as possible for good RF performance.
CTL(H)
CTL(L)
) at 5th pin. In order to block DC bias voltage of internal
) at 5th pin. In order to block DC bias voltage of internal
DESCRIPTION
NJG1649HB6
- 3 -