sm8211m Nippon Precision Circuits Inc, (NPC), sm8211m Datasheet - Page 17
sm8211m
Manufacturer Part Number
sm8211m
Description
Pocsag Decoder For Pagers
Manufacturer
Nippon Precision Circuits Inc, (NPC)
Datasheet
1.SM8211M.pdf
(22 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
SM8211M
Manufacturer:
NPC
Quantity:
20 000
Part Number:
sm8211m-E2
Manufacturer:
NPC
Quantity:
20 000
Extended Reset
When RST goes LOW for 1 to 2 ms or longer, BS1
and BS3 together go HIGH. Approximately 1 to 2 ms
after RST goes HIGH, device operation continues.
When RST is LOW for less than 200 ms
When RST is LOW for more than 200 ms
If the RST LOW-level pulsewidth exceeds 200 ms,
the parameters for switch-ON mode should be
quickly set over again as soon as RST returns HIGH.
For internal oscillator operation, RST goes LOW for
1 ms or longer immediately after power is applied or
just after a BACKUP release. After RST returns
TX-DATA
TX-CLK
RST
RST
BS1
BS3
BS1
BS3
> 200 ms
Figure 11. Extended reset timing ( 200 ms)
1 to 2 ms
Figure 10. Extended reset timing
SM8211M
BS3 can also follow the dashed line during this interval.
1 to 200 ms
This function is useful for checking the RF stage cir-
cuits. After RST goes HIGH, the device waits for the
ID code input.
HIGH, a wait time of approximately 900 ms (V
1.5 to 3.5 V) or 1.5 s (V
observed before operation starts.
DATA
NIPPON PRECISION CIRCUITS—17
1 to 2 ms
DD
< 1.5 V) should be
DD
=