MGDS-150-H-B ETC2 [List of Unclassifed Manufacturers], MGDS-150-H-B Datasheet - Page 11

• Manufacturer Part Number: MGDS-150-H-B
• Description: Hi-Rel DC/DC CONVERTER
• Manufacturer: ETC2 [List of Unclassifed Manufacturers]

©
Gaia Converter FC02-009.08/06 Revision N
11- Environmental Qualifications
The modules have been subjected to the following environmental qualifications.
Characteristics
Climatic Qualifications
Life at high
Humidity cyclic
Humidity steady
cycling
Mechanical Qualifications
(Sinusoidal)
(Half sinus)
Bump
(Half sinus)
temperature
Altitude
Salt atmosphere
Temperature
Temperature shock
Vibration
Shock
Duration
Duration
Number of cycle
Relative humidity variation
Damp heat
Duration
Duration
Number of cycles
Number of shocks
Number of cycles
Frequency / amplitude
Frequency / acceleration
Duration
Number of shocks
Peak acceleration
Duration
Number of bumps
Peak acceleration
Duration
Conditions
Temperature / status of unit
Altitude level C
Climb up
Stabilization
Status of unit
Cycle duration
Temperature variation
Status of unit
Temperature
Status of unit
Temperature
Concentration NaCl
Status of unit
Temperature change
Transfert time
Steady state time
Status of unit
Temperature change
Transfert time
Steady state time
Status of unit
Status of unit
Shock form
Status of unit
Status of unit
For locations, phone, fax, E-Mail see back cover
MGDM-150 Low Input Series
@ 105°C case, unit operating
@ 125°C ambient, unit not operating
1.000 ft/min to 70.000 f@-55°C,
unit operating
10
60 % to 88 %
unit not operating
56 days
unit not operating
5 %
unit not operating
200
20 min.
unit operating
100
10 sec.
20 min.
unit not operating
10 cycles in each axis
10 to 60 Hz / 0.7 mm
60 to 2000 Hz / 10 g
2h 30 min. per axis
unit not operating
100 g
6 ms
1/2 sinusoidal
unit not operating
2000 Bumps in each axis
6 ms
unit not operating
Severity
Test D : 1.000 Hrs
40.000 ft@-55°C
30 min.
30 min.
Cycle I : 24 Hrs
31°C to 41°C
93 % relative humidity
40°C
35°C
48 Hrs
-40°C / +85°C
40 min.
-55°C / +105°C
3 shocks in each axis
40 g
MIL-STD-202G
Method 108A
MIL-STD-810E
Method 500.3
MIL-STD-810E
Method 507.3
MIL-STD-202G
Method 103B
MIL-STD-810E
Method 509.3
MIL-STD-202A
Method 102A
MIL-STD-202G
Method 107G
MIL-STD-810D
Method 514.3
MIL-STD-810D
Method 516.3
MIL-STD-810D
Method 516.3
Test procedure
Hi-Rel
Grade
4
11