EVAL-ADM3051EBZ Analog Devices, EVAL-ADM3051EBZ Datasheet

EVAL-ADM3051EBZ

Manufacturer Part Number

EVAL-ADM3051EBZ

Description

EVALBOARD/ADM3051EBZ

Manufacturer

Analog Devices

Datasheet

1.EVAL-ADM3051EBZ.pdf (8 pages)

Specifications of EVAL-ADM3051EBZ

Pack_quantity

Comm_code

85437090

Lead_time

Eccn

EAR99

Current page: 1 of 8
Download datasheet (279Kb)

One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com

FEATURES

Easy evaluation of the

Convenient connections for power and logic signals through

Screw terminal block for bus cable signals and shield

Test points for measuring all signals

Configure operating mode using jumper connection

Slope control resistor of 47 kΩ fitted by default

Termination resistors (2 × 30 Ω) with common-mode filter

EVALUATION KIT CONTENTS

EVAL-ADM3051EBZ

GENERAL DESCRIPTION

The EVAL-ADM3051EBZ allows quick and easy evaluation of the

ADM3051

the input and output functions to be exercised without the need

for external components. Screw terminal blocks provide convenient

connections for logic signals and power.

The main device on the evaluation board, the ADM3051, is a

controller area network (CAN) physical layer transceiver,

allowing a protocol layer CAN controller to access the physical

layer bus. The

standard. It is capable of running at data rates of up to 1 Mbps.

For evaluation with a bus cable, a screw terminal block is

provided to allow connection of CANH and CANL signals and

connection of the cable shield.

PLEASE SEE THE LAST PAGE FOR AN IMPORTANT

WARNING AND LEGAL TERMS AND CONDITIONS.

High speed

Slope control

Standby

(CAN) transceiver

screw terminal blocks

CAN transceiver. The evaluation board allows all of

ADM3051

complies with the ISO 11898

Evaluation Board for the ADM3051 CAN Transceiver

controller area network

Rev. 0 | Page 1 of 8

The operating mode of the

jumper configuration. Three operating modes are available:

high speed, slope control, and standby. Selecting standby mode

connects Pin 8 (RS) of the

in a low current standby mode. Selecting slope control mode

limits EMI by connecting RS with a 47 kΩ resistor to ground to

modify the rise and fall of slopes. This mode facilitates the use

of unshielded cables. Alternatively, selecting high speed mode

disables slope control by connecting RS to ground, allowing

high speed operation. Shielded cables or other measures to

control EMI are necessary in this mode.

Evaluation Board User Guide

EVAL-ADM3051EBZ

ADM3051

Figure 1.

to V

can be selected by

, placing the device

UG-330

Related parts for EVAL-ADM3051EBZ

Related keywords

EVAL-ADM3051EBZ datasheet
EVAL-ADM3051EBZ data sheet
EVAL-ADM3051EBZ pdf datasheet
EVAL-ADM3051EBZ component
EVAL-ADM3051EBZ part
EVAL-ADM3051EBZ distributor
EVAL-ADM3051EBZ RoHS
EVAL-ADM3051EBZ datasheet download