RS9110-N-11-02 Redpine Signals, RS9110-N-11-02 Datasheet - Page 7

• Manufacturer Part Number: RS9110-N-11-02
• Description: WiFi / 802.11 Modules Ultra Low Power SingleBand (2.4 GHz)
• Manufacturer: Redpine Signals

Specifications of RS9110-N-11-02

• Rohs: yes
• Protocol Supported: 802.11 b/g/e/i
• Frequency Band: 2.4 GHz
• Data Rate: 1 Mbps to 65 Mbps
• Interface Type: I2C, SPI, UART
• Transmit Power (max): 17 dBm
• Antenna Connector Type: Chip
• Operating Supply Voltage: 3.3 V
• Supply Current Transmitting: 200 mA
• Supply Current Receiving: 149 mA
• Maximum Operating Temperature: + 85 C
• Dimensions: 13.7 mm x 12.9 mm
• Minimum Operating Temperature: - 40 C
• Modulation Technique: CCK, DSSS, OFDM
• Security: WEP 64/128 bit AES, WPA, WPA2

1.1: Host Interfaces
1.2: WLAN
1.2.1: MAC
1.2.2: Baseband Processing
1.2.3: RF Transceiver
1.3: Multi-Threaded Processor
1
Redpine Signals, Inc. Proprietary and confidential
1: Detailed Feature List
Compliance to inter-operability specifications based on the standards



















RS9110-N-11-02 802.11bgn WLAN Module
SDIO
SPI Interface
Conforms to IEEE 802.11b/g/n/e/i standards for MAC
Dynamic selection of fragment threshold, data rate, and antenna
depending on the channel statistics
Hardware accelerators for WEP 64/128-bit and AES
WPA, WPA2, WPA2-Enterprise, Voice Personal, WPS (PIN/PBC),
WMM and WMM-PS support
AMPDU and AMSDU aggregation for high performance
Firmware downloaded from host based on application
Supports DSSS (1, 2 Mbps) and CCK (5.5, 11 Mbps) modes
Supports all OFDM data rates (6, 9, 12, 18, 24, 36, 48, and 54 Mbps)
Supports IEEE 802.11n single-stream modes with data rates up to 65
Mbps
Supports long, short, and HT preamble modes
High-performance multipath compensation in OFDM, DSSS, and CCK
modes
Highly integrated 2.4 GHz transceiver with direct conversion architecture
Receiver with 38 dB RF selectable gain range and 60 dB baseband variable
gain range
Power amplifier with 19 dBm maximum output power
Integrated LNA, BPF, and T/R switch
RISC-based pipelined architecture




Version 2.0-compatible
Supports SD-SPI, 1-bit, and 4-bit SDIO modes
Operation up to a maximum clock speed of 50 MHz
Operation up to a maximum clock speed of 80 MHz
Version 1.49
Data Sheet
1
Page 7