X4-Z2U-U805 Digi International, X4-Z2U-U805 Datasheet - Page 2

• Manufacturer Part Number: X4-Z2U-U805
• Description: WiFi / 802.11 Modules CnnctPort X4 IA Gtwy ZigBee S2C High Pwr
• Manufacturer: Digi International

Specifications of X4-Z2U-U805

• Rohs: yes
• Frequency Band: 2.3 GHz to 2.7 GHz
• Data Rate: 230 Kbps
• Interface Type: RS-232, RS-485, USB
• Antenna Connector Type: Dipole, SMA
• Operating Supply Voltage: 6 V to 30 V
• Maximum Operating Temperature: + 75 C
• Dimensions: 13.33 cm x 8.5 cm x 2.54 cm
• Minimum Operating Temperature: - 30 C

Specifications
Features
Enclosure
Network Protocols
LEDs
Security
Real-Time Clock
Routing Features
VPN
Management
Memory
Industrial Protocol Support
Antenna Types
Antenna Connector Type
Dimensions (L x W x H)
and Weight
Power Requirements
Power Input Rating
Power Consumption
Surge Protection
External Power Supply
Interfaces
Serial
USB
I/O
Ethernet
RF
Cellular
connector included; Extended temperature power
230 Kbps; Full signal support for TXD, RXD, RTS,
Modbus bridge enables Modbus serial to Modbus/TCP conversion; Integrated Python code allows gateway to act as Modbus client/master or Modbus server/
1 RS-232 DB-9M serial port; Throughput up to
XBee®: 4” dipole (Ethernet models), 4” dipole with 2’ cable, tabletop mountable (Edge models);
1 RJ-45 port; Standard: IEEE 802.3; Physical Layer: 10/100Base-T; Data rate: 10/100 Mbps (auto-sensing); Mode: full or half duplex (auto-sensing)
Wi-Fi (optional): 4” dipole with 2’ cable SMA female, tabletop mountable; Cellular (optional):
slave; Functions like an Ethernet to serial bridge, but uses ZigBee to transport serial data; Handles unique timing issues per Modbus protocol rules
12 VDC power supply for 0° C to 60° C
(32° F to 140° F) with locking barrel
Hardware and software flow control
Commercial grade metal enclosure
ConnectPort® X4
supply available separately
IPsec with IKE/ISAKMP; Multiple tunnel support; DES, 3DES and up to 256-bit AES encryption; VPN pass-through, GRE forwarding
5.25 in x 3.35 in x 1.00 in (13.33 cm x 8.50 cm x 2.54 cm) 0.44 lb (0.20 kg)
CTS, DTR, DSR and DCD;
HTTP/HTTPS web interface, Password access control, IP service port control, Optional secure enterprise management via iDigi®
Wi-Fi: 1 x SMA male; XBee 1 x SMA male; Cellular: 1 or 2 x SMA, female
Ethernet status, Power, Cellular link/activity, Signal strength
4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4
3G/4G GSM/3G CDMA: HSPA+/EV-DO 800/850/900/1700 (AWS)/1900/2100 MHz Gobi with Rx Diversity
(4 bars), ZigBee link/activity, Wi-Fi link/activity
Available in ZigBee (2.4 GHz), DigiMesh® (2.4 GHz or 900 MHz), 802.15.4, 900, 868
Idle: 1.5 W, Max: 10.4 W
7” dipole SMA male
3G/4G GSM: HSPA+ 850/900/1900/2100 MHz with Rx Diversity
6-30 VDC
N/A
NAT, Port forwarding, Access control lists (IP filtering)
Uses Modbus Unit ID to look up IP or mesh MAC address
signal support for TXD, RXD, RTS, CTS, DTR, DSR
RS-232/485; Throughput up to 230 Kbps; Full
SSL tunnels, SSHv2, FIPS 197 (IPsec, HTTPS)
and DCD; Hardware and software flow control
Compression Terminal; No external AC power
1 DB-9M serial port, software selectable
1 powered USB Type A connector (Host)
UDP/TCP, DHCP, SNMPv1, SNMPv1/v2
GSM: Edge 850/900/1800/1900 MHz
ConnectPort® X4 IA
Commercial grade metal enclosure;
CDMA: 1XRTT 800/1900 MHz
DIN rail bracket included
16 MB Flash, 32 MB RAM
supply included
Yes
ZigBee/802.15.4 SMA female antenna, magnetic
(193 mm x 143 mm x 69 mm) 3.10 lb (1.41 kg)
Software-selectable RS-232/485, screw terminal
2 analog and 2 digital ports to connect sensors
mount; Cellular: 2” dual band dipole SMA male
block connection; Throughput up to 230 Kbps;
2 kV burst (EFT) (with included power supply)
Signal strength (5 bars), ZigBee link/activity
Ethernet status, Power, Cellular link/activity,
XBee: 1 x SMA, male; Cellular: 1 x SMA, female
Full signal support for TXD, RXD, RTS, CTS,
Hardware and software flow control
ConnectPort® X4 H
NEMA 4X/IP66 rated enclosure
7.60 in x 5.63 in x 2.72 in
Internal AC power supply
DTR, DSR and DCD;
or other devices
Approx. 15 W
100-240 VAC