SI8233BB-C-IS1 Silicon Laboratories Inc, SI8233BB-C-IS1 Datasheet - Page 52

• Manufacturer Part Number: SI8233BB-C-IS1
• Description: IC HIGH/LOW SIDE DRIVER 16SOIC
• Manufacturer: Silicon Laboratories Inc

Specifications of SI8233BB-C-IS1

• Package / Case: 16-SOIC (3.9mm Width)
• Configuration: High or Low Side
• Input Type: Non-Inverting
• Delay Time: 60ns
• Current - Peak: 4A
• Number Of Configurations: 2
• Number Of Outputs: 2
• Voltage - Supply: 6.5 V ~ 24 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Mounting Style: SMD/SMT
• Number Of Channels: 2
• Propagation Delay Time: 30 ns
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.5 V
• Supply Current: 2 mA
• Power Dissipation: 1.2 W
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Number Of Drivers: 2
• Driver Configuration: Non-Inverting
• Driver Type: High and Low Side
• Input Logic Level: TTL
• Rise Time: 12ns
• Fall Time: 12ns
• Frequency (max): 8MHz
• Operating Supply Voltage (max): 5.5/24V
• Peak Output Current: 4A
• Output Resistance: 2.7Ohm
• Operating Supply Voltage (min): 4.5/6.5V
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 16
• Package Type: SOIC N
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• High Side Voltage - Max (bootstrap): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1905-5; 339-1905-5; 339-1905-5

Si823x
C
Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, TX 78701
Tel: 1+[phone]
Fax: 1+[phone]
Toll Free: 1+[phone]
Please visit the Silicon Labs Technical Support web page:
https://www.silabs.com/support/pages/contacttechnicalsupport.aspx
and register to submit a technical support request.
Silicon Laboratories and Silicon Labs are trademarks of Silicon Laboratories Inc.
Other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders.
52
The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice.
Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from
the use of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the functioning of undescribed features
or parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon Laboratories makes no warranty, rep-
resentation or guarantee regarding the suitability of its products for any particular purpose, nor does Silicon Laboratories assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation conse-
quential or incidental damages. Silicon Laboratories products are not designed, intended, or authorized for use in applications intended to
support or sustain life, or for any other application in which the failure of the Silicon Laboratories product could create a situation where per-
sonal injury or death may occur. Should Buyer purchase or use Silicon Laboratories products for any such unintended or unauthorized ap-
plication, Buyer shall indemnify and hold Silicon Laboratories harmless against all claims and damages.
The sale of this product contains no licenses to Power-One’s intellectual property. Contact Power-One, Inc. for appropriate licenses.
ONTACT
I
NFORMATION
Rev. 1.1