MAX5007ACUB+ Maxim Integrated Products, MAX5007ACUB+ Datasheet - Page 7

• Manufacturer Part Number: MAX5007ACUB+
• Description: IC REG USB LDO 150MA 10-UMAX
• Manufacturer: Maxim Integrated Products

Specifications of MAX5007ACUB+

• Applications: Converter, USB
• Voltage - Input: 4 ~ 5.5 V
• Number Of Outputs: 1
• Voltage - Output: 3.3V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 10-MSOP, Micro10™, 10-uMAX, 10-uSOP
• Polarity: Positive
• Input Voltage Max: 5.5 V
• Output Voltage: 3.3 V
• Output Type: Fixed
• Dropout Voltage (max): 0.4 V at 150 mA
• Output Current: 0.15 A
• Voltage Regulation Accuracy: 3 %
• Maximum Power Dissipation: 444 mW
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The MAX5005/MAX5006/MAX5007 are USB applica-
tion-specific, low-dropout, low-quiescent current linear
regulators with an integrated µP reset circuit (see
Figure 1). The devices drive loads up to 150mA and
are available with a fixed output voltage of +3.3V.
Features include 1.5k
and ±15kV transient voltage suppression (TVS) in
accordance with IEC1000-4-2 (EN61000-4-2) Air
Discharge Method and MILSTD883C- Method 3015-6
making the MAX5005/MAX5006/MAX5007 ideal for use
with USB peripheral devices. The internal reset circuit
monitors the regulator output voltage and asserts a
reset signal when the output is typically -7.5% out of
regulation for MAX500_ACUB and -12.5% out of regula-
tion for MAX500_BCUB.
Figure 1. Functional Diagram
150mA USB LDO Regulators with ±15kV TVS
_______________________________________________________________________________________
Detailed Description
4.0V to 5.5V
D+ and D- termination resistors
IN
D+
GND
PROTECTION
OUT
CURRENT
REVERSE
MAX5005
MAX5006
MAX5007
TVS
V
REF
1.23V
SPEED
FULL
PROTECTION
1.5k
CURRENT
LIMIT
ERROR
AMP
LDO
PROTECTION
SELR
TERMINATION
THERMAL
DRIVER
USB
COMPARATOR
The reset supervisor circuit is fully integrated in the
MAX5005/MAX5006/MAX5007, and uses the same ref-
erence voltage as the regulator. Two supply tolerance
reset thresholds, typically -7.5% and -12.5%, are avail-
able for each type of device.
7.5% reset: Reset does not assert until the regulator
output voltage is at least -3.6% out of tolerance and
always asserts before the regulator output voltage is
-11.5% out of tolerance.
12.5% reset: Reset does not assert until the regulator
output voltage is at least -8.8% out of tolerance and
always asserts before the regulator output voltage is
-16.7% out of tolerance.
The MAX5005/MAX5006/MAX5007 µP supervisory cir-
cuits assert a reset during power-up, power-down, and
ENR
RESET
GND
1.5k
SPEED
LOW
PROTECTION
TIMEOUT
SURGE
200ms
RESET
ESD/
( ) FOR MAX5007 ONLY.
TVS
OUT
25k
and µP Reset
OUT
3.3V
MR
RESET/(RESET)
D-
Reset Circuit
Reset Output
7