ADP3163JRUZ-REEL Analog Devices Inc, ADP3163JRUZ-REEL Datasheet - Page 14

• Manufacturer Part Number: ADP3163JRUZ-REEL
• Description: IC REG BUCK 5BIT 2-3PHAS 20TSSOP
• Manufacturer: Analog Devices Inc

Specifications of ADP3163JRUZ-REEL

• Applications: Controller, Intel Pentium® IV
• Voltage - Input: 5V, 12V
• Number Of Outputs: 1
• Voltage - Output: 1.1 ~ 1.85 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 20-TSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ADP3163JRUZREELTR

ADP3163
14. The output power path, though not as critical as the switch-
15. For best EMI containment, the power ground plane should
ing power path, should also be routed to encompass a small
area. The output power path is formed by the current path
through the current sensing resistor, the inductors, the output
capacitors, and back to the input capacitors.
extend fully under all the power components except the out-
put capacitors. These components are: the input capacitors,
the power MOSFETs and Schottky diodes, the inductors, the
current sense resistor, and any snubbing element that might
be added to dampen ringing. Avoid extending the power
ground under any other circuitry or signal lines, including
the voltage and current sense lines.
Signal Circuitry
16. The output voltage is sensed and regulated between the FB
17. The CS+ and CS– traces should be Kelvin-connected to
pin and the GND pin (which connects to the signal ground
plane). The output current is sensed (as a voltage) by the
CS+ and CS– pins. In order to avoid differential mode
noise pickup in the sensed signal, the loop area should be
small. Thus the FB trace should be routed atop the signal
ground plane and the CS+ and CS– pins. (The CS+ pin
should be over the signal ground plane as well.)
the current sense resistor, so that the additional voltage
drop due to current flow on the PCB at the current sense
resistor connections, does not affect the sensed voltage.