AFCT-5805DZ Avago Technologies US Inc., AFCT-5805DZ Datasheet - Page 6

• Manufacturer Part Number: AFCT-5805DZ
• Description: TXRX OPT SM 155MBS SONET OC3/SDH
• Manufacturer: Avago Technologies US Inc.

Specifications of AFCT-5805DZ

• Applications: General Purpose
• Data Rate: 155Mbps
• Wavelength: 1300nm
• Voltage - Supply: *
• Connector Type: SC
• Mounting Type: Through Hole
• Data Rate Max: 0.155Gbps
• Supply Voltage: 5V
• Wavelength Typ: 1300nm
• Peak Reflow Compatible (260 C): Yes
• Optical Fiber Type: TX/RX
• Data Transfer Rate: 155Mbps
• Optical Rise Time: 2/2.2ns
• Optical Fall Time: 2/2.2ns
• Operating Temperature Classification: Commercial
• Peak Wavelength: 1360nm
• Operating Supply Voltage (min): 3.1V
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.25V
• Operating Temp Range: 0C to 70C
• Mounting: Through Hole
• Pin Count: 9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Regulatory Compliance
The AFCT-5805xxZ is intended to enable commercial
system designers to develop equipment that complies
with the various regulations governing certification of
Information Technology Equipment. See the Regulatory
Compliance Table 1 for details. Additional information is
available from your Avago Technologies sales represen-
tative.
Electrostatic Discharge (ESD)
There are two design cases in which immunity to ESD
damage is important.
The first case is during handling of the transceiver prior
to mounting it on the circuit board. It is important to
use normal ESD handling precautions for ESD sensitive
devices. These precautions include using grounded wrist
straps, work benches and floor mats in ESD controlled
areas.
The second case to consider is static discharges to the
exterior of the equipment chassis containing the trans-
ceiver parts. To the extent that the duplex SC connector
is exposed to the outside of the equipment chassis it may
be subject to whatever ESD system level test criteria that
the equipment is intended to meet.

Electromagnetic Interference (EMI)
Most equipment designs utilizing these high-speed trans-
ceivers from Avago Technologies will be required to meet
the requirements of FCC in the United States, CENELEC
EN55022 (CISPR 22) in Europe and VCCI in Japan.
The AFCT-5805xxZ has been characterized without a
chassis enclosure to demonstrate the robustness of the
part’s integral shielding. Performance of a system con-
taining these transceivers within a well designed chassis
is expected to be better than the results of these tests
with no chassis enclosure.
Immunity
Equipment utilizing these AFCT-5805xxZ transceivers will
be subject to radio-frequency electromagnetic fields in
some environments. These transceivers, with their integral
shields, have been characterized without the benefit of
a normal equipment chassis enclosure and the results
are reported below. Performance of a system contain-
ing these transceivers within a well designed chassis
is expected to be better than the results of these tests
without a chassis enclosure.